|
|
|
CUPOLEX ecodome Structural Dome Slab Concrete Floor System - CodeMark
Concrete over an interlocking dome system to create a floating or structured concrete slab
|
|
|
|
|
|
Plytech Panels Hardwood formply
Precision formwork, flawless concrete finishes, and enduring strength for your vision.
|
|
|
|
|
|
Robinson Seismic RoGlider® sliding bearing
Seismically isolating light weight buildings or other structures
|
|
|
|
|
|
Fosroc Form Release Agent
Economical, general purpose formwork and mould release agent.
|
|
|
|
|
|
Construction Formply Concrete Formply
|
Plymasters Limited Partnership |
Used for Concrete shuttering, Exposed beams, Shear walls, High rise form work and foundations
|
|
|
|
|
|
Rockbond 7.17 Surface Retarder Plus
|
Rockbond Special Concrete Products |
A concrete surface retarder for concrete with strengths of 20 MPa+, on concrete under 20MPa.
|
|
|
|
|
|
Max Frank Egcobox® cantilever connections sytem
|
Max Frank Australia PTY Ltd |
An insulated cantilever connection system to prevent thermal bridging.
|
|
|
|
|
|
ECO-Block Insulated Concrete Form
ECO-Block is a stay in place, Insulating Concrete Forming system (ICF)
|
|
|
|
|
|
MegaFound MegaFound Insulated Foundations
MegaFound foundation systems has been specifically designed for your foundations.
|
|
|
|
|
|
Pultron Composites Mateen bar
Highly resistant to corrosion making it the perfect substitute for traditional steel reinforcements.
|
|
|
|
|
|
Max Frank Stremaform® formwork elements
|
Max Frank Australia PTY Ltd |
Stay-in-place expanded metal formwork system for slabs and walls.
|
|
|
|
|
|
Rockbond 7.27 Evaporation Retarder
|
Rockbond Special Concrete Products |
A Surface-Active Agent in water solution used to reduce water evaporation rate from fresh concrete
|
|
|
|
|
|
Stratmore Fibercast
|
Stratmore Construction Solutions |
12, 19 and 38 mm long fibres
|
|
|
|
|
|
Rockbond 5.03 Thixotropic Grout
|
Rockbond Special Concrete Products |
A premixed blend of fine cement powders, compatible admixtures and thixotropic agents.
|
|
|
|
|
|
Fletcher Easysteel Steel reinforcing rods
Reinforcing rounds deformed
|
|
|
|
|
|
EXPOL GeoFoam Lightweight Polystyrene Fill
EXPOL GeoFoam Lightweight polystyrene (EPS) fill, available in a variety of sizes and densities.
|
|
|
|
|
|
Canzac Speedform
Replaces traditional timber formwork. Its lightweight and structurally strong, easy to use on site
|
|
|
|
|
|
Mapei Mapeshield I
|
Mapei Products (MBP (NZ) Ltd) |
Pure coated zinc anodes for galvanic cathodic protection against corrosion of reinforcement rods
|
|
|
|
|
|
Max Frank Shearail® punching shear reinforcement
|
Max Frank Australia PTY Ltd |
Certified prefabricated punching shear reinforcement system for flat, piled and post-tensioned slabs
|
|
|
|
|
|
AFS Logicwall®
Permanent formwork for load-bearing concrete walls designed for multi-residential
|
|
|
|
|
|
Rockbond 7.10 Slabcure
|
Rockbond Special Concrete Products |
A cost effective spray-on curing compound with no effect on future floor adhesives or paint.
|
|
|
|
|
|
Robinson Seismic Seismic Bearing (RSB)
Seismic bearing in a range of rubber properties
|
|
|
|
|
|
Aquacomb Water Detention
|
Construction Solution Products Ltd (Aquacomb) |
In-slab stormwater system
|
|
|
|
|
|
AFS Intertenancy Wall
The AFS Intertenancy Wall uses Logicwall to create a load bearing, acoustic and fire rated wall.
|
|
|
|
|
|
Connolly Key Joint
Galvanised steel tongue-and groove formwork
|
|
|
|
|
|
Max Frank CAD Manager
|
Max Frank Australia PTY Ltd |
Download all files available at new link.
|
|
|
|
|
|
Rockbond 2.20 SL30 Self Leveller
|
Rockbond Special Concrete Products |
A self-smoothing cementitious underlayment when installed 3mm or above.
|
|
|
|
|
|
Robinson Seismic Lead Extrusion Dampers (LED)
Dampers for seismic isolation and other vibrations
|
|
|
|
|
|
Max Frank Pecafil® universal formwork elements
|
Max Frank Australia PTY Ltd |
Stay in place formwork elements for construction of ground beams, pile caps and ribbed slabs.
|
|
|
|
|
|
Rockbond 7.16 Surface Retarder
|
Rockbond Special Concrete Products |
A concrete surface retarder and recommended to be used on concrete with strengths up to 20 MPa.
|
|
|
|