The R130SCRN is manufactured from 316 grade stainless steel. The top surface has a sand blasted texture & satin finish surface design for slip resistance.
The R130SCRN6 is designed to go into tile and screed topping.
With a fitted O-ring the lid is gas-tight.
The Cleanout/Inspection point is also available in polished 304 stainless steel and satin 316 stainless steel.
Two rubber O-ring seals allows the outlet to fit inside 100mm PVC, HDPE, and copper pipe.
Security screws are available.
The R130SCRN Cleanout is Watermark Certified.
Specification codes:
The SPS Push-in Cleanout range is also available with;
Other outlet sizes are: 80mm, 150mm, 225mm.
Lid surface sizes are available as 110mm,130mm,150mm, 200mm, 225mm, 275mm.
The SPS R130SCRN Cleanout is intended for use as an access and inspection point for plumbing and drainage systems, allowing easy maintenance, inspection, and removal of debris.
It is designed to be installed within internal flooring areas such as tile, screed topping, and vinyl floors, fitting into 100mm pipes made of PVC, HDPE, copper, cast iron, and internal diameter pipes.
It features a gas-tight lid with O-ring seals and an optional security screw for added protection.
Restrictions include use specifically within compatible pipe sizes and types, and it is not intended for environments exceeding its material limits such as excessively corrosive or structural load conditions beyond designed capacities.
The cleanout suits both residential and commercial installations where reliable and durable plumbing access is required.
E1 Compliance (Surface Water)
E1 ensures buildings can safely dispose of surface water and protect against flooding or water ingress.
While cleanouts are mainly used for foul or drainage water, the SPS R130SCRN is often specified for floor and external drains, offering secure sealing at access points that might otherwise permit water ingress or escape.
Its compatibility with standard New Zealand surface, drainage, and plumbing systems (100mm diameter PVC, HDPE, or copper pipe) ensures a consistent E1-compliant drainage design.
The O-ring-sealed push connection prevents water leakage or ingress at floor or pavement level.
G13 Compliance (Foul Water)
The SPS R130SCRN provides a secure, watertight and gastight inspection point, allowing routine access for maintenance and preventing gas, water, or odour migration into buildings.
Its 316 stainless steel construction provides durable corrosion resistance, vital for wastewater installations.
The push-in, O-ring-sealed design provides a reliable connection that meets the performance standards for pipework joints and cleanout points as specified under G13.
G14 Compliance (Industrial Liquid Waste)
G14 addresses the management and safe transportation of liquid wastes from industrial processes, requiring appropriate materials, access arrangements, and containment measures.
The use of 316 stainless—widely accepted for chemical resistance—ensures the cleanout remains uncompromised by aggressive liquids or cleaning chemicals often encountered in industrial drainage.
The gas-tight O-ring lid prevents the escape of noxious or hazardous gases from the drainage system, a key requirement for health and environmental control under G14.
Secure lid options fulfil the need for tamper resistance mandated in publicly accessible or high-risk industrial zones.
The SPS R130SCRN is a secure, watertight, and gastight inspection point for wastewater, industrial liquid waste, and surface water systems, meeting NZ G13, G14, and E1 compliance standards.
G13 (Foul Water):
G14 (Industrial Liquid Waste):
E1 (Surface Water):
SPS Cleanouts, supported by engineering design, adhere to New Zealand and Australian standards, and have a proven track record in demanding applications providing evidence of compliance with NZBC Clauses G13 and E1. Full compliance is achieved when the products are correctly selected, installed and maintained according to manufacturer and code requirements.
Individual data sheets for SPS floor drains detail specifications such as material grades, outlet sizes, load ratings, and installation requirements. These are available on the Metabronze Industries and the SPS - Specialty Plumbing Supplies Website, providing technical information, dimensions, material options, and application notes for each drain model.
The SPS Product Manual includes specifications, drawings, material details, flow rates, load ratings, and strainer descriptions for floor wastes and roof drains. It covers construction features, sizes, and compliance with standards like AS3996-2006 and AS/NZS 3500.2.2.Watermark Certification:
The SPS R130SCRN Floor Drain is Watermark Certified - AT 55200:040.
The SPS R130SCRN Cleanout is a 316 stainless steel inspection point designed for foul water, industrial, and surface drainage systems. It provides watertight, gastight, and corrosion-resistant access for maintenance while complying with NZ G13, G14, and E1 standards.
Suitable for 100 mm PVC, HDPE, and copper pipes, it prevents leakage, odour, and gas escape. Ideal for residential, commercial, and industrial sites, it resists chemicals and harsh environments.
Restrictions include non-pressurised use, standard temperature limits, and correct installation to maintain sealing. Its polished stainless appearance, flush-fit or domed lid, and optional tamper-resistant or gas-tight covers offer durability, safety, and a neat, professional finish.
The SPS R130SCRN Cleanout is installed as an accessible inspection point within foul, industrial, or surface drainage systems to meet NZBC G13, G14, and E1 requirements. It is fitted inline or at pipe junctions using its push-in O-ring seal to create a watertight and gastight joint compliant with AS/NZS 1260 and G13/AS2.
The cleanout is positioned at access points indicated by G13 and G14 (such as drain ends or bends) and remains easily accessible for maintenance. For surface or floor drains beneath E1, it should be installed flush with finished surfaces to prevent ponding or water ingress.
Underground or external installations need proper bedding and sealing to stop infiltration.
Where exposed to public or industrial areas, a tamper-resistant or gas-tight lid must be used to maintain compliance with G14 safety and odour control provisions.
Correct sizing (100 mm system compatibility) and alignment ensure consistent performance and compliance with regulations.
The SPS R130SCRN Cleanout, constructed from durable 316 grade stainless steel with a gas-tight lid and optional security screws, meets B2: Durability standards by requiring only regular maintenance to ensure long-term performance.
Maintenance involves routine cleaning to prevent debris accumulation, inspection, and replacing seals such as O-rings to uphold the gas-tight seal quality.
The design supports reliable operation in challenging environments, with a lifecycle expected to meet B2 durability criteria of at least 15 years for moderately difficult-to-access plumbing components.
Its corrosion-resistant materials greatly decrease maintenance needs, keeping it compliant with durability standards without requiring extensive repairs.
THE PRODUCT IDENTIFIERS FOR THE SPS R130SCRN CLEANOUT ARE ALPHANUMERIC CODES USED TO SPECIFY PARTICULAR VERSIONS OF THE PRODUCT. THE TECHNICAL IDENTIFIERS INCLUDE: R130SCR4 FOR THE POLISHED 304 GRADE STAINLESS STEEL VERSION R130SCR6 FOR THE SATIN 316 GRADE STAINLESS STEEL VERSION R130SCRN6 FOR THE NON-SLIP 316 GRADE STAINLESS STEEL VERSION THESE CODES DIFFERENTIATE THE PRODUCT VARIANTS BY MATERIAL FINISH AND FEATURES. ADDITIONAL SUFFIXES LIKE "/SEC" INDICATE OPTIONAL SECURITY SCREWS. THESE IDENTIFIERS HELP ENSURE THE CORRECT PRODUCT TYPE IS SELECTED FOR SPECIFIC APPLICATIONS AND REQUIREMENTS.
This product has no warnings associated with it.
