Suitable for Natural Gas and LPG applications.
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
The product has and can make available the following additional evidence to support the above statements:
All designs and construction shall be within the requirements and the tables set out in the VSH XPress GAS Australasian Technical Specification Rev1 and in Limitation D - available from the manufacturer’s web site www.kekelit.co.nz, including design velocities in accordance with the corresponding European standards referenced, and all other uses are outside the scope of this certificate
Installation shall be performed by KE KELIT trained and approved installers, who shall be Registered Certifying Gasfitter or a Registered Licensed Gasfitter under the supervision of a Certifying Gasfitter.
Installation and maintenance - where applicable - of the VSH XPress GAS Fittings, shall be in accordance with the VSH XPress GAS Fittings Australasian Technical Specification and the VSH XPress GAS distributed by KE KELIT Technical Manual Revision 1.3
Installers are required to hold a KE KELIT Installation training card.
KE KELIT approved tools must only be used as outlined in the VSH XPress GAS Systems Training Handbook and the VSH XPress GAS distributed by KE KELIT NZ Technical Manual Revision 1.3.