Novacolor Marmorino KS is a smooth, polished Venetian plaster finish with natural tonal variation.
Applied by hand in multiple layers, the system achieves surfaces with depth and a refined mineral quality suited to contemporary and traditional interiors alike.
Available in an extensive curated colour range with custom tinting.
System thickness approximately 1–2mm.
Suitable substrates include plasterboard (GIB), cement board, concrete, and plastered surfaces. Level 4 substrate finish required.
Suitable for residential and commercial interior walls, feature walls, and ceilings. Not recommended for direct wet areas.
Supplied by The Finish with a network of certified Novacolor applicators. 10-year product warranty.
Novacolor Marmorino KS is a hand-applied, multi-coat Venetian plaster finish for use on interior walls and ceilings in residential and commercial buildings. It is supplied by The Finish NZ and applied by trained and certified applicators. This statement covers the use of Novacolor Marmorino KS as a decorative interior surface finish on correctly prepared substrates including plasterboard (GIB), cement board, concrete, and plastered surfaces. Use is limited to interior, dry areas. This product is not intended for use in wet areas, exterior applications, or structural purposes.
Manufacturer's Warranty Novacolor (the Manufacturer) warrants the product quality of Novacolor Marmorino KS for a period of 10 years from the date of completion of installation, subject to compliance with the supplier's installation and maintenance requirements and applicable exclusions.
According to the criteria reported in EN 13501-1:2009 standard Novacolor Marmorino KS is classified as A2
View Fire rating certificate
Novacolor Marmorino KS is suited to interior feature walls, full-room wall applications, and ceilings in residential and commercial settings.
Best specified where depth, tonal variation, and a handcrafted surface quality are the design intent. Not recommended for wet areas or surfaces subject to continuous moisture exposure.
Colour selection should account for natural tonal shift across large wall areas - samples are recommended prior to final specification.
Substrate preparation to Level 4 finish is required; imperfections will telegraph through the applied system. Custom colour matching available on request. Contact The Finish for sample specification support.
Novacolor Marmorino KS must be applied by a trained and certified applicator in accordance with Novacolor's technical data sheet.
Substrate must be clean, dry, structurally sound, and prepared to a Level 4 finish with no visible fixings.
Suitable substrates include plasterboard (GIB), existing painted surfaces, concrete, fibre-cement board.
Ambient temperature during application should be between 5°C and 35°C.
Protect from direct sunlight, rain, and moisture during application and cure.
Clean with a soft damp cloth and mild, pH-neutral detergent.
Avoid abrasive cleaners, scouring pads, or solvent-based products.
Do not allow standing water to remain on the surface.
Minor surface scuffs may be spot-repaired by a certified applicator using matched product.
NOVACOLOR MARMORINO KS
This product has no warnings associated with it.
