Coral Brush is suitable for all types of entrance areas, absorbing moisture and removing dry soiling as the weather demands. With its simple, solid colours, this entrance flooring works well with any interior design.
● A good all-rounder that removes both moisture and dirt
● Made with Econyl® 100% regenerated yarns
● Suitable for the toughest commercial use
● Ideal for inside entrance and circulation areas
Coral Duo entrance flooring is the ideal solution when you need maximum dirt removal, unrivalled dirt retention and exceptional moisture absorption, all in just a couple of paces.
● 75% of the yarn is regenerated Econyl® solution dyed polyamide
● Produced with phthalate free technology
● Unbeatable performance on both moisture and dirt removal
● Ideal for inside entrances with limited entrance floor space
Residential and Commercial Interior floors, in dry and wet level areas. Coral; Grip HD & Grip MD are suitable for use in exterior applications. Commercial Very Heavy Duty Use - class 33.
Recommended for use at least 1.8m in from every entry/exit of a building. 3m is recommended.
Forbo Coral has a product warranty of up to 5 years depending on product placement and is produced in accordance with ISO9001:2015 Quality Management Systems and ISO14001:2015 Environmental Management Systems, requirements. Refer to the Forbo Standard Product Warranty, Installation, and Care & Maintenance documentation for further information
Forbo Coral maintains a valid test report showing a Critical Radiant Flux (CRF) value over 4.5kW/m2 meeting all levels of C3 requirements.
Coral is considered an acceptable dry and wet slip solution and is compliant for all access routes as per the D1/AS1 Table 2. Coral achieves a SRV of 59 and has a R12 rating making it suitable for use on ramped areas and in entrances and exits.
Forbo Coral is easy to clean, impervious and water resistant. Refer to the Coral cleaning and maintenance Guide and Installation Guide for more information.
No components within Forbo Coral are considered Hazardous. Refer to the Forbo Coral Material Safety Data Sheet and VOC Report documents for further information
G3.3.2 Forbo Coral is allergy friendly, has low emissions, and is phthalate free.
For IIC, a field test with the subfloor and ceiling assembly needs to be performed to ensure the IIC value of 55 is reached for each individual project application.
Various options available, see www.forbo.com for options
Luxe, Brush, Duo, Classic, Grip HD, Luxe EV, Welcome
Coral Brush and Coral Classic are available in modular format, 50x50cm tiles. Rolls come with a 2.5cm edge on either side in the following formats; 205cm x 20m for Coral; Duo, Welcome, Luxe, Brush and Classic. 127cm x10-15m for Coral; Grip HD & Grip MD. There are also custom formats available on request.
Dense Nylon 6.6 yarn with PVC backing incorporating glass fibre layer
When ordering material each floor area must be specified from the same batch. Rolls and cuts should be stored horizontally. Coral sheet products should always be fully adhered. The recommended adhesive for use with Coral classic, brush pure, brush blend, welcome, grip and duo is AF2365 or UZIN KE2000S. There is an arrow indicating pile direction on the reverse of every backed sheet product. The direction of manufacture of Coral duo is not the traffic direction – ensure the ribs are running at right angles to the walking direction. Remove the 2.5cm edge border plus an additional 1cm to provide a suitable edge for butt jointing.
The installation of Coral Entrance Matting should be carried out in accordance with NZS 1884-2013 “Resilient sheet and tiles laying and maintenance practices.” and must be installed by a qualified trades person in accordance with FloorNZ’s Best Practice Guidelines and installed in accordance with the Forbo Installation Guide. Coral must be cleaned and maintained as per the Forbo Coral Entrance Matting Cleaning and Maintenance guide.
CORAL LUXE, BRUSH, DUO, CLASSIC, GRIP HD, LUXE EV, WELCOME
This product has no warnings associated with it.
