Technical Statement
Product Description
Triton Duo 35™ is a 35 mm thick dual layer composite absorber/ attenuator ceiling panel with Sonatex™ facer 25mm absorber and high mass 740 kg/m³ 10mm attenuator backer. To compliment any interior, Duo 35 is available in a wide range of decorative acoustic laminate finishes, colours, woodprints, and perforated patterns.
Scope of use
Designed for control of both room reverberation and speech privacy between offices, meeting rooms and attenuation of rain noise under metal roofing, plenum mechanical services, buildings near aircraft flight paths or train lines. Panels simply lay into standard Rondo Donn exposed grid systems for ease of installation and plenum access where required.
• For interior use only, and not in direct contact with water.
• Not for use with negative air return plenums.
• Maximum humidity/temperature 99% R/H at 45°C.
• Back loading max. 1.5kg/m², point loads to be independently supported.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(c)
Clause B2.3.1 (c) (i): 5 years if building elements are easy
to access and replace.
Asona ceiling tiles with only normal
maintenance will have a minimum durability of at least 5 years when installed
in accordance with; manufacturer’s installation requirements and AS/NZS
2785:2020.
In use history. No test
methods available
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.4(a)
Clause
C/AS2 3.4(a): Asona Triton Duo 35 has a Fire Material Group Number 1-S by NZBC
verification method C/VM2 Appendix A, tested in accordance with ISO 5660 or ISO
9705.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
B2 Durability and C3 Early Reaction to Fire
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
Multiple installations within PTS scope.
Product Criteria
Design requirements
Triton Duo 35 panels are 1200 x 600mm as standard, with 600 x 600mm and 600 x 2400mm also available. A wide range of decorative finishes, woodgrain, colours and perforations allow unique design possibilities for most installations.
Packaging Take Back Scheme: (NZ only) Flat pack cartons on site and return to Asona for reuse.
Renew & Reuse Stewardship Program: (NZ only) Soiled or damaged panels can be resurfaced with new Sonatex or Sonaris laminates for reuse in the ceiling. Helps extend life cycle and reduce construction waste. Register on practical completion.
Installation requirements
Shall not commence until the building is watertight and dry. This product is designed to be mounted into a two-way exposed grid system and installed to manufacturer’s, AS/NZS
2785:2020 Standard’s and AWCINZ Code of Practice requirements. Seismic design may require a suitably qualified engineer. Hold down clips may be required in areas of wind uplift, and/or air grilles used to balance air pressure. Care shall be taken when handling tiles to avoid damage.
Service Panel Protection:
Panels are available with temporary foil covering to protect and keep panels
clean during the construction phase.
Maintenance requirements
Clean with a vacuum, soft brush or damp cloth. Re-surfacing of damaged panels available, consult Asona..
Warrantees
Triton Duo 35 is covered by a 15 year limited warranty against manufacturing defects, extendable to 30 years when registered for Asona’s Renew and Reuse program.
Environmental
Duo 35 is Global GreenTag Certified, Level A, contains 80% recycled glass waste, low VOC <0.005 Mg/M²/hr per ASTM D5116. Packaging return, panel Renew and Reuse programs.
Quality Assurance
 |
ISO 9001 (Quality Management) |
Relationships
 |
New Zealand Made |
 |
Global GreenTag Pty Ltd
ASO-TR01-2023-GR |
Building Product Information Requirements
Manufacturer
Legal Trading Name:
Asona Limited
Business Email:
info@asona.co.nz
Contact Number/s:
09 5256575
Product Identifier
TD35.0606 35 X 600 X 600 MM A / SQUARE
TD35.0612 35 X 600 X 1200 MM A / SQUARE
Warnings
This product has no warnings associated with it.
