Product Description
CS TimberFormed is a high-quality architectural cavity slider.
Jambs are supplied standard in either Pine or Rimu for architraves or grooved for plaster board. Special sizes, timbers and profiles are available on request (grooved jambs are mitred). Supplied fully assembled, with or without a door fitted.
- Patented cavity frame is fully tested and guaranteed. It is engineered from high quality heavy duty extruded aluminium.
- Door and carriages can be removed without removing wall linings.
- Available as Single or Bi-Parting (double) units.
- Door cannot jump off the track.
- Fits into a standard thickness wall (90 x 45mm framing).
- Supplied fully assembled for on-site installation.
- No visible floor guides.
- Can be provided with Fixed Head Jambs that don’t need to be removed to maintain the door
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3(a), B1.3.3(f), B1.3.3(j), B1.3.4
- Clause B2 Durability: Performance B2.3.1, B2.3.1(a), B2.3.1(b), B2.3.1(c)
- Clause F2 Hazardous building materials: Performance F2.3.1
Use in Service History
CS Cavity Sliders have been successfully used in commercial, residential and institutional projects in New Zealand and Australia since 1986. CS Cavity Sliders are backed by a 10 Year Written Guarantee.
Design requirements
Refer to the CS FOR DOORS
Specification Guide for design parameters. Units can be supplied with timber
jambs or prefinished powdercoated aluminium jambs in a variety of colours.
CS Cavity Sliders are
designed to fit standard stud walls (nominally 100 mm). Options are also
available for 70 mm, 94 mm and 140 mm stud walls. An intermediate stud is
included in the framing for stability in all units for doors wider than 920 mm.
CS Easyopen units require a
minimum door width of 910 mm.
Special
sizes, timbers and profiles are available on request.
CS Cavity Sliders can be specified with almost
any choice of door, including aluminium CS DoorLeaves. Door carrying capacity: 120kg using standard 2-wheel carriages. 4-wheel carriages are supplied for
heavier doors.
Installation requirements
CS Cavity Sliders must be installed in accordance with the
manufacturer's installation instructions. Lintels over the full trim size
(opening and pocket) should be sized to ensure that no load is applied to
the door assembly. Lintels to NZS3604 are acceptable for door weights up to
75kg per metre width of door. Specific design required when the door
weight exceeds 75kg per metre.
Track must be fitted level and straight and fixed at maximum 600mm
centres to the lintel.
Refer to CS FOR DOORS detailed instructions for preparation and
finishing of the door opening and final door installation.
Maintenance requirements
Refer to CS FOR DOORS detailed instructions on powder coated aluminium
product maintenance.
Under normal circumstances, CS Cavity Sliders require no maintenance.
In high use situations, the carriages will eventually need replacing.
Replacement carriages and instructions on replacement are available from CS FOR DOORS.
Any service requirements should be referred to one of our four branches
Environmental
CS FOR DOORS products are made in New Zealand.
CS FOR DOORS operates a
zero waste policy with all metal offcuts and waste recycled. Timber components
are made from pine from sustainable resources.
