Designed for ease of installation and a negative detail that is second to none.
Alement Plus is available in a range of heights from 12mm to 80mm which can be mixed in use. For example you can have a 25mm on the floor and a 12mm on the vertical or use the 80mm on the floor and insert a timber skirting over the top to lift the position of the negative.
Auckland University were commissioned to do a STC test for us and a STC of 45 was achieved using a 64mm steel stud.
All come in 5.6m lengths that will stay straight and true, in most cases you wont have joins.
The sections range covers from 64mm steel stud with one layer of 13mm plasterboard to 92mm steel stud with 3 layers of plasterboard.
There is a full range of matching one sided beads also.
Our keep stock of premium Niche anodised or we can have them powder coated to a colour of your choice.
Alement Plus is an extruded aluminium section that contains at least 80% recycled aluminium content.
Scope of use
Designed specifically for interior use in commercial and domestic construction. The sections generally do not have any length or height restrictions.
All sections are to be used with 13mm plaster board, stopped according to stopping compound instructions. Note if the sections are powder coated we recommend removing the powder from the stopping bead and adding a bonding agent to the compound
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2
- Clause B2 Durability: Performance B2.3.1(b)
- Clause F2 Hazardous building materials: Performance F2.3.1
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
PSL have been supplying aluminium systems to the New Zealand
construction sector for over 20 years.
Alement Plus 64 is ideal for ceiling heights of 3.2m or leas, but not limited to this. Alement Plus 92 is ideal for ceiling heights greater than 3.2m, but can be used for any height.
Also refer to Alement 64 and Alement 92 for guidelines.
All sections are cut to measure on site and are installed by a fit out or joinery contractor.
All partitions to suspended ceiling require seismic bracing such as Tracklok bracing
Full installation details are available on our website
should be washed down with warm water & a mild soap solution. Fine brushes
may be used to loosen attached grime - the use of anything stiffer or abrasive
may result in damage to the surface. Acid or alkali cleaners should not be
used, these will damage anodic films & may discolour coloured joinery.
Where greasy deposits are present, cleaning of the anodising maybe by means of
a soft cloth dipped in white spirit, or a mild liquid scourer followed by
wiping with a dry rag. Make sure no solvents come into contact with other parts
of the window.
NB: Solvents must
be kept from contact with the vinyl glazing gaskets. It is essential to rinse
after cleaning with copious applications of clean water particularly where
crevices are present and then dry the glass to avoid any marks.
Rural: Every 6
Urban: Every 3
Marine environments: (within 1 km of the sea): 6 monthly warm water detergent
wash, as well as monthly cold water washing.
year For execution
warranty on the installer/applicator standard form.
- Commence the
warranty from the date of practical completion of the contract works.
||ISO 9001 (Quality Management)
||New Zealand Made