Alement 92 is a central glazed partitioning system which is 132mm wide and profile heights of 25mm to 44mm.There is a wide range of options for mullions, Transoms, Door frames.
Offering some of the biggest glazing pockets in its class, Alement 64 will easily accept 12.38 Lam glass.
The system is designed for ease of use, we have built in screw ports and stacking bracket locators to allow for all build solutions.
All sections are extruded with 80% recycled aluminium content and our standard finish is premium Niche anodised, this offers a more consistent finish and a slightly more Matt finish, offering the natural look.
Scope of use
Alement 92 has been designed for interior partitioning using 92mm steel stud with 1 layer of 13mm plasterboard each side. Ideal for ceiling heights under 2.7m and greater. The system can be configured in many ways to achieve the look you want, with a range of removable beads on Mullions,Transoms and Glazing bars.
The only restrictions for the glazed walls will be determined by the NZ Glazing Standards, we are happy to work through this with you.
Our sections meet all NZ standards for extruded aluminium and surface finish.
Alement 92 can be used along side our DesignLine system, Alement 64, Alement Doors, Alement Sliding Doors and Alement MultiLayer
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2
- Clause B2 Durability: Performance B2.3.1(b)
- Clause F2 Hazardous building materials: Performance F2.3.1
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
PSL have been supplying aluminium systems to the New Zealand construction sector for over 20 years
Alement 92 can be installed in many configurations. There are often multiple ways to achieve the same look with different products.
Typically the system works best with ceiling heights 2.7m or grater. Glazing run lengths are determined by NZ glazing standards.
13mm plasterboard is required with this system to form flush walls
The system can accommodate full height doors, aluminium or timber both hinged or sliding.
Partitions need to have seismic restraints such as Tracklok partition brace
Anodised aluminium should be washed down with warm water & a mild soap solution. Fine brushes may be used to loosen attached grime - the use of anything stiffer or abrasive may result in damage to the surface. Acid or alkali cleaners should not be used, these will damage anodic films & may discolour coloured joinery. Where greasy deposits are present, cleaning of the anodising maybe by means of a soft cloth dipped in white spirit, or a mild liquid scourer followed by wiping with a dry rag. Make sure no solvents come into contact with other parts of the window. NB: Solvents must be kept from contact with the vinyl glazing gaskets. It is essential to rinse after cleaning with copious applications of clean water particularly where crevices are present and then dry the glass to avoid any marks. Recommended: Rural: Every 6 months Urban: Every 3 months Industrial & Marine environments: (within 1 km of the sea): 6 monthly warm water detergent wash, as well as monthly cold water washing.
WARRANTY - MANUFACTURER/SUPPLIER
5 years For materials
WARRANTY - INSTALLER/APPLICATOR
1 year For execution
- Provide this warranty on the installer/applicator standard form.
- Commence the warranty from the date of practical completion of the contract works
Our aluminium profiles are extruded in New Zealand by McKechnie Aluminium Solutions.All sections have a minimum of 80% recycled content. Recycled aluminium is re melted on site and use only 5% of the energy used for to produce Alumina.
They also have Enviromark Diamond status and have ISO14001 Environmental Management accreditation
||ISO 9001 (Quality Management)
||New Zealand Made