Scope of use
Décortech
Firesafe MDF is suitable for use in interior applications only and is not
recommended in exposed, damp or wet conditions as it can swell and break
when in contact with water. It may warp or expand if not sealed. It should not
be used in areas subject to high humidity. Suitable
applications include wall and ceiling linings, display panels, partition screens
and acoustic panels especially for schools, hospitals, commercial and public
buildings.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(c)
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.4
- Clause F2 Hazardous building materials: Performance F2.3.1
Design requirements
Design Guidelines
Décortech Firesafe
MDF is ideal to use when the aesthetic qualities of wood or a high-quality
paint finish are desired with the safety of a fire-retardant solution. Suitable
applications include wall and ceiling linings, display panels, partition
screens and acoustic panels especially for schools, hospitals, commercial and
public buildings. Our extensive range of Real Timber Veneers, painted
finishes, and acoustic perforations can be mixed and matched to create the
perfect panels for any space.
Décortech
Firesafe MDF is suitable for use in interior applications only and is not
recommended in exposed, damp or wet conditions as it can swell and break
when in contact with water. It may warp or expand if not sealed. It should not
be used in areas subject to high humidity.
Installation requirements
Walls: Battens or studs at 600mm centres maximum, with fixing at 200mm centres maximum around perimeter and 400mm centres maximum through centre area of the panel. We recommend good quality builder’s adhesive combined with some form of positive fixing i.e. screws or panel pins.
Ceilings: Battens should be at 400mm centres maximum, with fixing at 200mm centres maximum around perimeter and 400mm centres maximum through centre area of the panel. We recommend good quality builder’s adhesive combined with some form of positive fixing i.e. screws or panel pins. We recommend at least a 3-5mm negative detail between all edges of the panels.
Please see the Decortech Panel Fixing Guidelines for further information.
Maintenance requirements
We recommend cleaning the panels when required with a warm damp cloth. Do not use any solvents or abrasive cleaners. Panels must be installed by qualified tradesmen and handled with care. The product must be stored inside, off the ground, in a dry, well-ventilated area away from extreme temperature fluctuations. It is important to protect the panels during storage by covering and protecting all parts that can be exposed to damage, light or moisture however, panels must not be left wrapped in a non-breathable material (i.e. plastic) for longer than 4 days. The panels must be stacked squarely on top of one another with a full cover sheet on top to avoid edge discolouration. Panels should not be exposed to natural light when being stored as wood is a natural material and changes over time when exposed to UV-light. The Décortech factory applied clear satin finish is also UV based and exposure to light will cause colour variations.
Environmental
Décortech Firesafe MDF is environmentally friendly and produced under an environmental management system that is certified to IS0-14001. Wood veneers are sourced from sustainable and renewable forests and EC, FSC and COC veneers can be provided on request. Due to our Paintline and the contained process of applying paint, our clear satin finish has low to no VOC content once applied and cured resulting in reduced Greenhouse gas emissions and hazardous waste disposal.
