The perfect place to put your feet up at the end of a long day, the Camden looks great on both modern and classical structures, and provides a practical, contemporary solution with all the robustness of a full aluminium frame. The gap between the Camden’s double top rail and glass allows for great airflow and creates a traditional look with a modern twist. Key features of this range include:
Camden balustrade style is designed for, but is not limited to, use in projects within the following scope:
B1.3.3 - Camden balustrade adheres with the minimum barrier height in respect to the location and building type (As per Table 3.1 minimum barrier heights). Stair barriers in areas likely to be frequently used by children under six years of age require no gaps larger than 100mm and 150mm in the stair tread. Balustrade geometry shall follow the dimensions illustrated barriers in figure 3.3 (Example of barrier geometries).
B1.3.4 - Camden balustrade style loading aligns with the barrier loads set out in AS/NZS 1170.1 Clause 3.6 and Table 3.3. The magnitude of the barrier loads that need to be applied in the design depends specifically on the occupancy of that part of the building or structure
B1.3.5 - Camden balustrade style displacement is recommended to not exceed 30mm under barrier and wind loads as described in B1/VM1.
B1.3.7 - Camden balustrade style fixings and connections are designed to be suitable for the supporting structure (material and strength), the fixing (type, edge distance and spacing) and to be adequate to resist balustrade loads.
B1.3.8 - Camden balustrade has a durability requirement of no less than 15 years.
B1.3.9 - Camden balustrade style has no sharp edges or projections than can cause injury when restraining people. All extrusions have minor radii and any sharp edges are to be removed.
B1.4.3 - Camden balustrade style uses aluminum that has been designed in accordance with AS/NZS 1170.0:2002 Appendix B. All product is powder coated or anodized to the specifiers standards to ensure the best durability of the product in the installed location.
B2.3 - Camden balustrade element "Balustrade" must have a durability requirement of no less than 50 years.
D1.2.3.1 - Camden balustrade lower rail height is adjusted to where the surface of an accessible route is more than 25 mm above the adjacent ground to provide protection from falling.
F2.1.1 - Glazing likely subject to human impact shall comply with NZS 4223: Part 3
F4.1.1 - Camden balustrade adheres to the minimum barrier heights (F4/AS1 Table 1) in the respective area installed
F4.1.2.1 - Camden balustrade aligns with the barrier height and geometry as set out in Table 1, Figure 2, figure 3 and figure 4. The barrier design ensures that, anywhere over the full height of the barrier, a 100 mm diameter sphere cannot pass through. In applications where the barrier is on a staircase or similar application, The triangular opening formed by the riser, tread, and bottom rail of the barrier on a stair shall be of such a size that a 150 mm diameter sphere cannot pass through it.
F4.1.2.3 - Camden style shall adhere to the acceptable methods of the construction of rail barriers in conjunction with parapets so they are not readily available to be used as seats, as required by Clause
F4.3.4(h) for buildings other than housing.
F9.2.1 - The Camden balustrade can be used as a pool barrier when at the minimum height of 1200mm. Camden has been design to best relate to Figure 1 (b) and (d) balustrade to ensure compliance.
F9.2.4 - Camden adheres with appendices C, D, E & F which are acceptable methods for assessing the strength of pool barriers.
https://unex.co.nz/fabricators/fabrication-manuals/
CAMDEN
This product has no warnings associated with it.