Edgetec Double Disc Frameless Glass Balustrade
Product Technical Statement: 109385
Modern, minimal 50mm diameter round fixing discs, choice of powder coated aluminium or SS finishes
||Level of assurance needed to demonstrate NZ Building Code Compliance
Supporting documentation should include technical information by manufacturer and either a BRANZ or independent Appraisal or CodeMark
||Edgetec confirms that this minimum level of assurance has been met or exceeded by the following:
Nancekivell Cairn Ltd
Producer Statement (PS1)
Juralco Edgetec Double Disc Anchor is a round
disc balustrade system for residential and commercial applications where a
barrier (safety from falling), or pool fencing is required. The system
consists of 50mm diameter round discs with hidden fixings, in either an aluminium
or mirror polished stainless steel finish.
Edgetec Double Disc Anchor balustrade glass
infill is either 12mm or 15mm toughened safety glass, or 15.2mm or 17.2mm
laminated glass and an interlinking top rail, or no rail for pool fencing
and manufactured in New Zealand, the Edgetec Double Disc Anchor balustrade has
been engineered and tested by independent engineers to comply with NZ standards
AS/NZS1170 and is suitable for Domestic or Residential Occupancy A, A Other and
C3 and Commercial Occupancy Types B, E and C3.
Occupancy types as per AS/NZ1170.1.2002.
Handrails: Interlinking top rail – round or rectangular and end plate
Aluminium Edgetec Double Disc Anchor fixings
are powder coated in NZ with Dulux Duralloy finish or Duratec where AAMA 2604 performance
Scope of use
Edgetec Double Disc Anchor Balustrade is
suitable for internal or external settings, including: Domestic and
Residential deck and balcony barriers, stairways, handrails, pool fencing
and matching pool or stairway gates.
Offices and work areas not included elsewhere including storage areas
and Residential or Commercial area without obstacles for moving people and not
susceptible to overcrowding.
Edgetec Double Disc Anchor Balustrade must
only be installed in accordance with the Edgetec Double Disc Anchor product
manual. Any deviation from standard fabrication or installation must be
accompanied by a site specific PS1.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.4(a)
- Clause B2 Durability: Performance B2.3.1(a)
- Clause F2 Hazardous building materials: Performance F2.3.3(b)
- Clause F4 Safety from falling: Performance F4.3.1, F4.3.2, F4.3.3, F4.3.4(a), F4.3.4(b), F4.3.4(c), F4.3.4(d), F4.3.4(e), F4.3.4(f), F4.3.4(g), F4.3.4(h), F4.3.5(a), F4.3.5(b)
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
The product has and can make available the following additional evidence to support the above statements:
Refer to Juralco Edgetec Double Disc Anchor Balustrade specification and fabricators manual for design parameters and tables of maximum spans for wind zone up to and including Very High wind zone.This specification details the documents the Juralco Edgetec Double Disc Anchor Balustrade System refers to in relation to the New Zealand Building Code, the manufacturer's documents, products used in the System, requirements in relation to fixing and surface finishings.
Juralco Edgetec Double Disc Anchor Balustrade must only be installed in accordance with the Juralco Edgetec Double Disc Anchor Balustrade System manual. Any deviation from that specified in the Edgetec Double Disc Anchor balustrade manual must only be in accordance with the site specific PS1, with site specific calculations and drawings listing the non standard details.The Juralco Edgetec Double Disc Anchor Balustrade System must only be fabricated/installed by a Juralco approved fabricator.
The maintenance of aluminium and glass balustrades are similar st the recommended cleaning schedule is identical. In urban areas cleaning should take place every three months and rural areas every six months. In industrial and marine environments (within 1km of the sea), cleaning with a cold water wash should be monthly, as well as six monthly with a warm water detergent wash. Regular visual inspections will help to identify and fix any issues before they could become serious and should be done every few months.Anodised finishes with greasy deposits or hard to remove grime, should be cleaned with a soft cloth dipped in white spirit, turpentine or kerosene, then wiped with a dry rag.Rinse off with lots of clean fresh water.
Juralco Double Disc Anchor balustrade is warranted for 5 years.
Dulux powder coating warranty is 10 years for Duralloy and 20 years for Duratec (surface integrity).
||New Zealand Made
||Date last validated: 27 August 2019
||Date last updated: 27 August 2019
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier.
Refer to the miproducts Terms and Conditions
Juralco has a range of NZ designed products for the architecture industry and has a nationwide network of dealers who are experts in fabricating and installing specified products to NZ building code.
||Roller grilles and shutters