Edgetec Double Disc Anchor Balustrade by Juralco Aluminium

Edgetec Double Disc Anchor Balustrade

Juralco Aluminium

All products

Double Disc Anchor Balustrade Coaldust powder coat finish

Edgetec Double Disc Anchor Frameless Glass Balustrade in Satin Black Powder Coat Finish to match the homes joinery

2 Double Disc Frameless Glass Balustrade with interlinking rail

Double Disc Anchor Balustrade Evening shot

3 Double Disc Frameless Glass Internal Balustrade with interlinking top rail to comply with new regulations

Product Enquiries

Description

The Edgetec® Double Disc Anchor is a traditional 50mm diameter anchor fixing, available in powder coated aluminium and polished or satin stainless steel finishes. For 12 or 15mm toughened glass panels with an interlinking top rail, or 15.2mm or 17.2mm Laminated Glass (with glass clamps) and 13.52mm or 17.52mm SentryGlas with no interlinking top rail.

Key Features

Manufactured from architectural grade aluminium
Surface finished in New Zealand in a choice of Dulux powder coat colours
Also available in solid 316 marine grade polished or satin stainless steel
Hidden fixing details standard
30mm long body sets panels out from deck for easier water drainage and cleaning
Available in 12 or 15mm toughened glass with Interlinking Top Rail
No Interlinking Top Rail finish available using 15.2 or 17.2mm laminated glass and 13.52mm or 17.22mm Sentry laminated glass.
A range of glass stiffener brackets available for NZS4223.3.2016 conformance (laminated glass)
Complies with NZS1170:2002
No fixings seen at deck level
Custom made balustrade solution

Ranges

Balustrade Systems

NZ Made

NZ-Owned Business

Scope of Use

Edgetec Double Disc Anchor balustrade is suitable for deck and balcony barriers, pool fencing, internal stairways or landings and can be fixed to timber (including waterproof decks), concrete, and steel.

Suitable for:

Residential and Domestic Occupancy types A, A Other, and C3
Commercial Occupancy types B, E, and C3

A hidden fixing detail is standard for Double Disc Anchor fixings.

Limitations on Use

The Edgetec® Double Disc Anchor system must only be installed in accordance with the Edgetec Double Disc Anchor product manual
Glass must have a minimum strength of 100MPa
All glass edges must be polished
All glass holes must be smooth and free of chips and cracks

Low Wind Zone

Very High WInd Zone

Statement of Building Code Compliance

The Edgetec Double Disc Anchor balustrade system has been engineered and tested by independent engineers to comply with NZ standards AS/NZS1170 and NZS4223.3.2016, New Zealand Building Code B1, B2, F2, F4, F9 and section 162C of the Building Act (pool fencing regulations)
Edgetec Double Disc Anchor balustrade is suitable for Residential and Domestic Occupancy types A, A Other, and C3
Edgetec Double Disc Anchor balustrade is suitable for Commercial Occupancy types B, E, and C3

In-Service History

Juralco has over 18 years experience designing and installing balustrades throughout New Zealand and continues to focus on supporting and developing its dealer network. The Edgetec Double Disc Anchor Balustrade system was introduced for customers who prefer a traditional disc anchor fixing system, with a choice of either powder coat or stainless steel finishes.

The Edgetec balustrade range offers a choice of fixing systems for heavyweight glass panels that includes strut posts (Mini Post), rectangular clamps (JH Clamp), a cantilevered channel balustrade (Infinity) and the Double Disc Anchor. An interlinking top rail has been incorporated into the Edgetec range to comply with new 2016 balustrade regulations — NZS4223.3.2016.

Other Performance Attributes

Powder coated aluminium — finished in NZ in a choice of Dulux powder coat colours
Also available in solid 316 marine grade polished or satin stainless steel