Attaché Sleeper
Product Technical Statement: 111165
Safe from prying eyes
 |
Level of assurance needed to demonstrate NZ Building Code Compliance
Supporting documentation should include technical information by manufacturer and either a BRANZ or independent Appraisal or CodeMark
|
 |
Attaché
confirms that this minimum level of assurance has been met or exceeded by the following:
SCNZ -Structural Engineers New Zealand
Producer Statement PS1
|
Technical Statement
Scope of use
The
ultimate option for complete privacy. Aluminium infill panels can be varied
in colour giving the building or balcony personality.
Well
suited for social housing, multi residential designs. Breezeways and
balconies needing priacy.
Aluminium
barriers should be designed in accordance with AS/NZS 1664.1:1997 or tested
to comply with AS/NZS 1170.0:2002 Appendix B.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.4(a)
- Clause B2 Durability: Performance B2.3.1(a)
- Clause F2 Hazardous building materials: Performance F2.3.3(a), F2.3.3(b)
- Clause F4 Safety from falling: Performance F4.3.1, F4.3.2, F4.3.3, F4.3.4(a), F4.3.4(b), F4.3.4(c), F4.3.4(d), F4.3.4(e), F4.3.4(f), F4.3.4(g), F4.3.4(h), F4.3.5(a), F4.3.5(b)
Notes
AS/NZS
1170:2002 NZS4223.3.2016 NZS3603 AS/NZS1664 AS/NZS2208
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Attache
Balustrades are designed and tested to the applicable NZBC. The avaliable
supporting documents for design and building consent applications are:
Stuructural
Engineers New Zealand Producer Statement (PS1), design related span tables
and fixing connection details.
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
Refer to
Attache Balustrades specification and fabricators manual for design
parameters.This specification details the documents the Attache Balustrade
System refers to in relation to the New Zealand Building Code, the
manufacturer's documents, products used in the System, requirements in
relation to fixing and surface finishings
Installation requirements
Installations
must be in accordance with the manufacturer’s and engineer’s specifications.
Consideration
needs to be given to the durability and compatibility of materials in contact
(barrier material, fixings and fixing substrate) prior to installation.
 |
Date last validated:
07 October 2020 |
 |
Date last updated:
07 October 2020 |
Disclaimer
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier.
Refer to the miproducts Terms and Conditions
|
|
