The CL400 ADA Magnetic matches the look and functionality of the standard CL400 Magnetic range of cavity slider hardware, with added accessibility.
Utilising the patented magnetic mechanism of the CL400 Magnetic, this addition to the range provides flexibility for building owners.The CL400 ADA uses the same door cutout and striker and is able to be retrofitted over existing CL400 flush handles for the requirements of disabled tenants.
Performance B2.3.1 (c) 5 years.
CS EasyOpen complies with NZBC Acceptable Solution D1/AS1, Paragraph 7.0.5 and the minimum clear opening and door handle requirements of NZS 4121. The unit has a minimum clear opening width of 760 mm, the door handle is fitted by CS For Doors at a height between 900 mm and 1,200 mm above the floor, and is lever action with the end turned towards the door.
Suitable for cavity slider and surface slider doors. Choose from Passage, Passage with magnet, Privacy, Bi-Parting configurations
For compliance with NZS 4121:2001, the centre of the handle should be positioned between 900mm and 1200mm (1000mm optimal) above the finished floor level. The door needs to be at least 910mm wide to allow minimum clear walk through of 760mm. There must be 45mm of clear space from the edge of the pull handle to the nearest door jamb when the door is both fully open and completely closed. A flat closing jamb is recommended. The supplied ‘Down to Lock’ label must be positioned as close as possible to the handle. Consult local standards for guidelines relating to the specific project.
Clean door hardware only with mild soap and water. Do not use chemicals or solvents.
CL406A0125 (PASSAGE), CL406A0128 (PASSAGE WITH MAGNET), CL406B0125 (SNIB/SNIB) CL406B0128 (SNIB RH), CL406B0129 (SNIB LH)
This product has no warnings associated with it.
