Narrow your search

SUPPLIERS
BRANDS

Search Result for Outdoor showers » Allproof Industries Polymer Concrete Channel Drainage

Allproof Industries Polymer Concrete Channel Drainage

Product Technical Statement: 107896

Surface drainage for large exterior areas. High capacity drainage with a wide variety of grates.

Level of assurance needed to demonstrate NZ Building Code Compliance
Supporting documentation should include self-assessment and technical information by manufacturer

Allproof Industries confirms that this minimum level of assurance has been met or exceeded by the following:
Allproof Industries
Internal Documentation - 002

	Download/Print PTS
		Additional information is available to support this PTS. View it here
	Send to friend

Product Description

Allproof Industries Polymer Concrete (PC) range provides a durable high capacity drainage solution for exterior surface drainage. Ideal for any situation from residential driveways to expansive external areas on large commercial projects.

The range utilises polymers to supplement cement as the binder material, this creates a durable and flexible product that is highly resistant to a wide variety of chemicals and has extremely low permeability, making it excellent for commercial linear drainage installation.

Polymer Concrete has a physically flexible attribute giving it a higher durability once installed and resistance to cracking due to loadings passing across the channel.

PC is the ideal solution to all heavy duty channel requirements. Available in a range of widths, depths and grate options rated from load class A to D.

All channels and grates come as standard with lockdowns to secure the grates and prevent any damage through movement. Security lockdowns may be available depending on system set up and project requirements, please contact Allproof for more information.

Grates from this range can be utilised on other systems manufactured by Allproof Industries allowing designers to create consistency throughout their project.

This system also incorporates a range of inline sumps and pits available with compatible grates to complete an aesthetically consistent system that performs to a high level of hydraulic design.

Design Guidelines

The system design accommodates runs of up to 43 meters, terminating at a sump. A mirror image can then be run in the opposite direction, resulting in maximum length of 86 meters between sumps. Overall system length is unlimited. This may be reduced dependent on required capacities or other constraints. We suggest engaging a Hydraulics Consultant with your exact requirements.

On site mitre cuts are used to form corners, junctions and irregular lengths.

Joints can be sealed with suitable flexible sealant if required.

Outlets are achieved by utilising pre marked knockouts.

Allproof supply a wide range of grates to meet durability and capacity requirements. These include stainless steel, galvanised steel, glass filled nylon and cast iron.

*Note Cast Iron Grates supplied painted black. Oxidisation can occur naturally, is aesthetic, and will not impact on grate performance. Repaint grates as part of maintenance if black finish desired.

End Caps & sumps available to complete the system.

Environmental

Consider the environmental effect upon the product when making your grate selection. i.e. chemical and physical weathering

Technical Statement

Scope

Allproof's Polymer Concrete range is designed for the management of surface water catchment on medium to large areas. Once in the system waste water can then channeled into the storm water system via our matching range of Sumps and Pits.

Grate options cater for a wide variety of requirements, providing excellent solutions for everything from high foot traffic pedestrianised areas to heavy load resistant commercial applications (i.e. loading docks).

Allproof's base channel can be utilised in applications requiring varying load ratings by the use of differing grates from the range and concrete embedment.

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:

Allproof Polymer concrete channels are designed to be fully compliant with the requirements of New Zealand building code E1. However due to project specific variations it is recommended that a Hydraulics Engineer is engaged to aid in the selection of a system and ensure that it is adequate for your unique requirements and fit for the intended purpose.

Supporting Evidence

The product has and can make available the following additional evidence to support the above statements:

Allproof Industries
Internal Documentation - 002

Special Conditions

Installation requirements

A minimum concrete surround is required to meet load capacity requirements, please see documentation available on our website allproof.com.

Channels are set to height on a bed of concrete to achieve required embedment and finished paving height.

We suggest that site concrete is used to haunch the channel into position and prevent movement during concrete placement.

It is important to support the channel from the weight of the setting concrete by having either the original grates, or appropriate bracing in place. Protect grates from concrete contamination during installation by wrapping in plastic or masking tape. Alternatively, timber infills to match grate width can be installed during concrete pour to maintain channel design width.

Chemicals used during installation and finishing may react with a galvanised edge and/or grates, please ensure this has been catered for or a stainless steel finish may be required.

Maintenance requirements

Please see http://www.allproof.com.au/maintenance for all maintenance advice.

All grates are removable and regular cleaning and removal of debris is advised to maintain the channel function.

Sumps require regular cleaning as per E1 stipulation.

Date last validated: 27 August 2019

Date last updated: 27 August 2019

Disclaimer
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier. Refer to the miproducts Terms and Conditions

Polymer Concrete Channel with slot drain grates.

PC installed in Takapuna Commons with cast iron grates.

Polymer Concrete channel with cast Iron grate at Ponsonby Central Auckland.

Polymer Concrete installed at AUT with Wedge Wire Grate.

Polymer Concrete 200mm Wide by 225mm deep installed with Heelproof Cast Iron grate.

Product Information Links
	Drawings
	Technical Data
	Installation Instructions
	Maintenance
	Colour Range


Company:	Allproof Industries
Physical Address:	17 Bay Park Place Beach Haven AUCKLAND
Postal Address:	17 Bay Park Place Beach Haven AUCKLAND
Telephone:	9 4818020
Fax:	9 4818021
Email:
Website:	www.allproof.co.nz

Allproof Industries

Allproof Industries is a New Zealand family owned manufacturing, marketing and distribution company specialising in Plumbing, Drainage Systems and Fire Protection Products.

Products

	Drainage Products
	Insulation
	Passive Fire Protection
	Plumbing Products