Stratco Quickscreen Fencing is a garden feature, a privacy screen, a louvre, and a sunshade. Made from high strength, long lasting 65mm high aluminium blades, the versatile Quickscreen System can be adapted to suit a large range of applications. Available in Woodland Grey and Black, the aluminium slats of Quickscreen Fencing system will not warp, shrink, twist or splinter.
Stratco Quickscreen Fencing features non-weld assembly. Spacer blocks are included to give a 9mm, 15mm or 20mm slat spacing, however, any spacing is achievable. Stratco Quickscreen Fencing kits are in 2400mm W x 1800mm H modules. A complete kit includes: 24 x 65mm aluminium slats, 2 x side frames with snap-on covers , 1 x mid rail, 2 x top caps, spacer blocks and screws.
Custom made gates are available with horizontal slat screens. Stratco can supply pedestrian gates to size and flat pack.
Stratco Quickscreen Fencing meets the performance requirements of B1.3.1, B1.3.2, B2.3.3 (f), (h), (j) and B1.3.4.
Stratco Quickscreen Fencing meets the performance requirements of B2.3.1 (c) 5 years
Stratco Quickscreen Fencing is available in Woodland Grey and Black
Stratco Quickscreen Fencing kits are in 2400mm W x 1800mm H modules
Slats can be cut down to suit any opening width and be modified to suit sloping or undulated sites
Features non-weld assembly through using U channels
Spacer blocks included to give a 9mm, 15mm or 20mm slat spacing, however, any spacing is achievable
A building consent is required for fences greater than 2.5m in height. A fence up to 2.5m high does not require a building consent; however, all building work must still comply with the New Zealand Building Code
Fences erected around residential pools must comply with the requirements of Clause F9 of the New Zealand Building Code, including the requirements around access and gates. Additional hardware not supplied as standard by Stratco will be required for this.
Refer to the Fencing Act 1978 for legal considerations and obligations when building a fence
Full installation instructions are available at www.stratco.co.nz/siteassets/pdfs/nz_fencing_quickscreen.pdf
The sizes of post footings are dependant on the wind zone, soil type and the height of the fence. Tables are available on the website that can be used to select the correct footing. Footings shall be founded in natural soil only. Concrete shall have a minimum 28 day characteristic strength of 20MPa (Grade 20). The top of the concrete should be shaped to direct water away from the posts. For the three footings adjacent to a free end and posts supporting a gate, the footing size will need to be increased in depth by 100mm. All posts are to be embedded at least 500mm into the footing.
Stratco Quickscreen Fencing can be manually washed by either water and a sponge or a soft nylon brush or by water blasting at pressures of no more than 20MPa. Never use abrasive or solvent based cleaners such as turps, petrol or kerosene.
QUICKSCREEN FENCE
This product has no warnings associated with it.
