Technical Statement
Product Description
KlassikDrain is available in 100mm, 200mm and 300mm widths
and is a general purpose trench drain comprising modular Polycrete® Channels.
Each interconnecting unit is manufactured complete with integrally cast
galvanised steel edge rails (K100/K200/K300) or for enhanced corrosion
resistance and aesthetics, stainless steel edge rails (KS100/KS200/KS300).
Channels are available with the developed V profile and continuous sloped runs
of 40m across all widths.
A variety of grates is available in different materials and
styles up to load class D (AS 3996). This is equivalent to approximately 8
tonne wheel load. There is also a specialist range of grates marketed under the
trademark, Heelsafe® Anti-Slip. These are pedestrian friendly grates with
certified slip ratings to AS 4586.
For quick fitting and removal during
installation and maintenance, all grates are locked down with the patented
boltless mechanism, QuickLok.
Scope of use
Typical Applications
• Level entry thresholds
• Balconies
• Outdoor decks
• Entertaining areas
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause E1 Surface water: Performance E1.3.1, E1.3.2, E1.3.3, E1.3.3(a), E1.3.3(b), E1.3.3(c), E1.3.3(d), E1.3.3(e), E1.3.3(f)
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
ACO Threshold Drain System and Method
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
CERTIFICATE OF GRANT LETTERS PATENT
PATENT NUMBER: 743481
Threshold Drain System and Method Patentee(s):
ACO LIMITED, Unit I, 6 Percival Gull Place, MANGERE 2022, New Zealand. The patent date is 14 June 2018.The patent was granted on 2 July 2019.
Installation requirements
ACO DRAIN
grated trench drain systems must be
encased in a concrete surround. A minimum concrete compressive strength of 25
MPa to NZS 3104 is recommended for the concrete surround. Refer to
the standard installation drawings for minimum dimensional requirements for the
concrete surround.
Specific site conditions may require an increase in these
dimensions or reinforcement. Ensure the concrete encasement is designed for the
application. Engineering advice may be required.
For more information please visit https://www.aconz.co.nz/home/technical/trench-drain-design-form/
Maintenance requirements
Please see http://www.aco.co.nz for all maintenance advice.All grates are removable and regular cleaning and removal of debris is advised to maintain the channel function.
For full details please contact our office at (0)9 815 9500 or info@aconz.co.nz.
Warrantees
ACO Limited’s guarantees/warranties for the products supplied are stated on the ‘Standard Conditions of Sale’ in Clause 12 Guarantee.
The following is an extract, Clause 12.2:
“ACO will repair or replace any of the Goods or parts thereof in respect of which any defects arise from faulty materials or workmanship or (subject to clause 12.1 above) from ACO’s failure to supply Goods of the quality or specification ordered and are notified to ACO in writing within 6 months of the date of delivery provided all Goods have been paid for:
”The attached ‘Standard Conditions of Sale’ should be read in full.
Note, guarantees/warranties in regards to the installation of ACO products must be sourced from the installer.
Quality Assurance
 |
ISO 9001 (Quality Management) |
Relationships
 |
New Zealand Intellectual Property Office
743481 |
