Protecta Ex Mortar is high-performance fire-stopping mortar designed to seal service penetrations and openings in fire-rated walls and floors. When mixed with water, it forms a thermal insulating and fire-resistant compound that helps prevent the spread of fire and smoke while maintaining acoustic performance. The mortar expands slightly during curing to create a tight, durable seal and cures to a strong, load-bearing finish that can be sanded or drilled.
Suitable for cables, cable trays, bundled cables, steel, copper, alupex, composite and plastic pipes, it adheres to most common building materials including concrete, brick, steel and plastic. The product offers excellent air permeability performance, requires no priming on most substrates, and is fully set within approximately one hour. Assessed and tested to AS 1530.4:2014 and AS 4072.1:2005, it is also available in convenient 10 L pails for easy handling and installation.
Protecta® Ex Mortar is designed for sealing service penetrations and openings in fire-rated walls and floors. Suitable for cables, cable trays, cable bundles, metal pipes, plastic pipes, composite pipes, alupex pipes, and mixed services, it can be installed in concrete, masonry, steel, and other common construction types to maintain fire, smoke, and acoustic performance. When mixed with water, Protecta® EX Mortar forms a fire-resistant, thermal insulating compound that expands slightly during curing to create a tight, durable seal. Once cured, it provides a strong, load-bearing finish that can be sanded or drilled. It offers excellent air permeability performance, requires no priming on most substrates, and is fully set within approximately one hour. All installations must comply with tested or assessed systems to AS1530.4:2014 and AS4072.1:2005. Refer to firestopcentre.co.nz for FC tech drawings, product information, and test reports.
Protecta Ex Mortar has been tested and assessed to AS1430.4:2014 and AS4702.1:2005.
Protecta Ex Mortar has been tested and assessed to AS 1530.4:2014 and AS 4072.1:2005, providing fire resistance ratings (FRR) when applied to fire-rated substrates in accordance with the relevant tested system, tech drawings and product information.
Please refer to below links.
Protecta Ex Mortar product page
Protecta Ex Mortar BPIR Sheet
Protecta Ex Mortar should be used for interior applications in fire-rated walls and floors where protection against the spread of fire, smoke, and sound through apertures and service penetrations is required.
The product must be installed in accordance with the relevant tested and assessed systems to AS 1530.4:2014 and AS 4072.1:2005. Suitable substrates include concrete, masonry, timber, gypsum construction materials.
Protecta Ex Mortar is suitable for blank apertures, service penetration gaps, and applications used in conjunction with Protecta FR Board and FR Pipe Wrap systems.
Refer to firestopcentre.co.nz for FC tech drawings, product information, and test reports relating to specific application, design, and installation instructions. Products must not be modified in any way that may compromise performance. All fire-rated service penetrations must be labelled in accordance with AS 4072.1:2005.
Protecta products should be stored in a clean, dry location and kept in their original packaging prior to installation.
Protecta passive fire protection products have no specific maintenance requirements. Damaged products should be repaired or replaced to maintain the required FRR of the fire-rated system.
PRO-EXMORTAR
This product has no warnings associated with it.
