Gypclean™ is an economical vinyl faced plasterboard ceiling panel with foil back and tape sealed edges four sides. Designed for exposed grid suspended ceilings where a low cost easy to clean hygiene ceiling panel is required.
Gypclean™ is an economical vinyl faced plasterboard ceiling panel with foil back and tape sealed edges four sides. designed to be mounted into a two-way exposed grid system where a low cost easy to clean hygiene ceiling panel is required. Ideal for shops, food processing facilities, cafés, restaurants and general ceilings where sound absorption is not required.
· For interior use only, and not in direct contact with water.
· Maximum humidity/temperature 90% R/H at 45°C.
· Back loading max. distributed load 1.0kg/m², point loads to be independently supported.
· Not suitable for areas prone to extreme heat, steam or freezing conditions.
Clause B2.3.1 (c) (i): 5 years if building elements are easy to access and replace.
Asona ceiling tiles with only normal maintenance will have a minimum durability of at least 5 years when installed in accordance with; manufacturer’s installation requirements and AS/NZS 2785:2020.
In use history. No test methods available
Clause C/AS2 3.4(a):
Asona Gypclean has a Fire Material Group Number 1-S by NZBC verification method C/VM2 Appendix A, tested in accordance with ISO 5660 or ISO 9705.
Clause G3.3.2: Spaces for food preparation and utensil washing shall have:(a) Interior linings and work surfaces shall be impervious and easily cleaned.
Asona Gypclean has an impervious vinyl facing, foil back with taped edges.
Vinyl finish tested ASTM D-1308, method B 24 hour test followed by washing with soap and water. No stain results recorded for: Ammonia, bleach, coffee, coca cola, crayon, detergent, ethanol, hydrogen peroxide, hydrochloric acid 10%, ketchup, lemon juice, mayonnaise, milk, oleic acid, pencil, port wine, sodium hydroxide 10%, tea, vinegar.
Ideal for shops, food processing facilities, cafés, restaurants and general ceilings where sound absorption is not required. The impervious surface complies to NZBC clauses G3.3.2 : Spaces for food preparation and utensil washing shall have:(a) Interior linings and work surfaces shall be impervious and easily cleaned. This product is designed to be mounted into a two-way exposed grid system.
Shall not commence until the building is watertight and dry. This product is designed to be mounted into a two-way exposed grid system and installed to manufacturer’s, AS/NZS 2785:2020 Standard and AWCINZ Code of Practice requirements. Seismic design may require a suitably qualified engineer. Care shall be taken when handling tiles to avoid damage.
Clean with vacuum, soft brush or wet wipe with a damp soapy cloth, clean away residual soap and dry after cleaning. Not suitable for water blasting pressure cleaning technique.
GY10.0612 10 X 600 X 1200MM
This product has no warnings associated with it.
