Walls using the SRP™ Staggered Stud System are commonly used to provide effective resistance to sound transmission and acoustic impact. These walls are constructed with the SRP™ Studs being alternately positioned to each leg of a wider SRP™ Track, where only every second SRP™ Stud is positioned on the same side of the SRP™ Track leg providing support for the plasterboard. Most commonly, SRP™ Staggered Walls are installed using SRP™ 92mm 0.55BMT 30mm leg SRP™ Tracks with SRP™ 63.5 0.55BMT SRP™ Studs staggered at 300mm centre [see FIGURE 10].
Walls are installed using the relevant GIB® documentation in order to achieve the required STC and FRR rating. Refer to GIB® Noise Control Systems March 2006 and GIB® Fire Rated Systems October 2012 for more information.
Our steel walls are fast and simple to install, lightweight, strong, durable, precise, dimensionally stable, pest/rot or fungus resistant and made from recyclable raw material.
The SRP Staggered stud wall system is commonly used to provide effective resistance to sound transmission and acoustic impact. Staggered stud walls are constructed with the SRP steel studs being alternately positioned to each leg of a wider SRP track, where only every second stud is positioned on the same side of the SRP track leg providing support for the plasterboard.
Max. recommended Max. Wall height = 2700mm.
Two-way FRR, Acoustic and Inter-tenancy walls.
B1/ VM1 An Engineered design is required - this needs to be done by a suitably qualified Engineer, who can also provide a PS-1.
SRP uses GALVSTEEL® manufactured by New Zealand Steel. The continuous hot-dip galvanized Zinc coating conforms to the industry standard required for this application; Z275 (275 g/m2 total). New Zealand Steel made GALVSTEEL® for framing is backed by a 50-year Durability Statement to demonstrate compliance with NZBC Clause B2-Durability, when used and maintained as referred to in the current New Zealand Steel’s Durability Statement.
G6/ AS1
1. ASNZ4600 (Steel chemical composition, gauge grade tolerance, galvanised coating, testing statistics, yield point etc).
2. NZS4129 (seismic)
3. NZS3404 (fabrication)
4. AS1397 (sheet and strip)
5. AS1538 (cold formed structures)
6. ASZNZ1170 (steel structures)
7. AS/NZS2785 (Suspended Ceilings)
Please contact Steel Rollformed Products Ltd - for Design Assistance, or visit www.srpltd.co.nz
An Engineered design is often required - this needs to be done by a suitably qualified Engineer, who can also provide a PS-1.
Please refer SRP Wall Systems Handbook for installation requirements.
No maintenance required - SRP Galv Steel products/ systems are typically concealed/ hidden (Within walls/ ceilings), once installed.
PRODUCT CODES:
This product has no warnings associated with it.
