Technical Statement
Product Description
Asona Renew™ is a proprietary service that renews soiled, stained or damaged acoustical ceiling panels without the time, financial and environmental costs associated with replacement.
Ceiling panels are resurfaced on site or removed to Asona’s factory for resurfacing with new Sonatex™ acoustic facings or vacuum laminated with washable vinyl film for hygiene areas.
Scope of use
Renew™ is ideal for commercial building owners and facility
managers who wish to upgrade their suspended ceilings in
offices, healthcare and educational facilities, retail etc.
This product is designed to be applied to lay-in ceiling tiles and mounted into a two-way exposed grid system.
• For interior use only, and not in direct contact with water.
• Not for use with negative air return plenums.
• Maximum humidity/temperature 99% R/H at 45°C.
• May be subject to the condition of the ceiling tile to be applied to.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(c)
Clause B2.3.1 (c) (i): 5 years if building elements are easy
to access and replace.
Asona ceiling tiles with Renew resurfacing with only normal
maintenance will have a minimum durability of at least 5 years when installed
in accordance with; manufacturer’s installation requirements and AS/NZS
2785:2020.
In use history. No test
methods available
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.4(a)
Clause
C/AS2 3.4(a):
Asona Renew Sonatex facing has a Fire Material Group Number 1-S by NZBC
verification method C/VM2 Appendix A, tested in accordance with ISO 5660 or ISO
9705.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
B2 Durability and C3 Early Reaction to Fire
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
ASB contact centre, Auckland
Product Criteria
Design requirements
Renew™ is ideal for commercial building owners and facility
managers who wish to upgrade their suspended ceilings in
offices, healthcare and educational facilities, retail etc .
Asona Renew™ is a proprietary service that renews soiled,
stained or damaged acoustical ceiling panels without the time,
financial and environmental costs associated with replacement.
Installation requirements
Ceiling panels are resurfaced on site or removed to Asona’s factory for resurfacing with new Sonatex™ acoustic facings or vacuum laminated with washable vinyl film for hygiene areas.
Shall not commence until the building is watertight and dry. This product is designed to be applied to lay-in ceiling tiles and mounted into a two-way exposed grid system and installed to manufacturer’s, AS/NZS
2785:2020 Standard and AWCINZ Code of Practice requirements. Seismic design may require a suitably qualified engineer. Hold down clips may be required in areas of wind uplift, and/or air grilles used to balance air pressure. Care shall betaken when handling tiles to avoid damage.
Maintenance requirements
Clean with a vacuum, soft brush or damp cloth
Warrantees
15 year limited warranty against manufacturing defect.
Environmental
Reduces construction waste going to land fill.
Renews and reuses suspended ceiling panels.
Helps minimise the buildings carbon foot print.
Extends ceiling panel usable life cycle time.
Made locally so transport and embodied energy costs are
low compared to replacement with new imported panels.
Quality Assurance
 |
ISO 9001 (Quality Management) |
Relationships
 |
New Zealand Made |
Building Product Information Requirements
Manufacturer
Legal Trading Name:
Asona Limited
Business Email:
info@asona.co.nz
Contact Number/s:
09 5256575
Product Identifier
NOT APPLICABLE.
Warnings
This product has no warnings associated with it.
