Conectabal Commercial Balustrades prevent injuries or falls from retaining walls and elevated areas, with single or double handrail options designed for NZBC Compliace (F4 Safety from Falling). Manufactured from hot dip galvanized steel with solid steel balusters, Conectabal Commercial Balustrades are pre-engineered and pre-configured for compliance with the New Zealand Building Code (NZBC) and the National Construction Code (NCC/BCA) and independently load tested for compliance with AS/NZS 1170.1:2002. Flush connection points achieve a smoother,safer finish, with standard or fire stair configurations available.
With eight configurations available in the Conectabal family, Moddex Commercial and Industrial Balustrades serve multiple purposes – including:
When you need to mitigate or eliminate risk to workers, customers and visitors from falls from height in public areas, Moddex Conectabal commercial balustrades are the ideal balustrade solution that can offer a high safety load rating.
Suitable applications include:
Moddex Care and Maintenance Manual (Maintenance) Latest Revision: September 2023
Moddex Conectabal PS1 (Design) - Available upon request. Email info@moddex.co.nz
B1 Structure: Moddex Conectabal Systems have been designed and tested in accordance with loadings AS/NZS 1170.1:2002 table 3.3 and AS 1657:2013 CL6.1. They have been designed to take live loadings of: Line: 0.75kN/m Concentrated: 0.6kN Infill: 1KPa/0.5KN.
B2 Durability: Moddex Conectabal Systems are galvanized to AS 4792 and AS/NZS 4680:2006 and can provide a durability of at least 5 years in all Exposure Zones. Durability is dependent on the Conectabal Balustrade being installed and maintained in accordance with Moddex specifications and recommendations.
D1 Access Routes: Moddex Conectabal balustrades integrate with D1 compliant accessible handrail on accessible routes over 1m.
F4 Safety From Falling: Moddex Conecatbal balustrades are manufactured with balusters that do not exceed 100mm horizontally as stated in F4 1.2 Balustrade Construction. Balustrade height is dependent on the required standards for the project application to ensure a safe and secure safety from falling system. All Conectabal Balustrades have been designed and manufactured with the following live loadings: Line: 0.75 kN/m Concentrated: 0.6 kN Infill: 1KPa/0.5KN
The Moddex Balustrade System must be installed to a substrate (as designed by others) that is able to resist the applied loads.
Not suitable for use on roads or public transport areas where the barrier is required to meet car loading requirements.
Conectabal balustrade systems must be installed by an accredited Moddex Installer as per the Moddex Conectabal PS1 and the Moddex Installation Guide.
Durability is dependent on the Conectabal Balustrade being installed and maintained in accordance with Moddex specifications and recommendations. Refer to Moddex Care and Maintenance Manual.
CB10 - STANDARD BALUSTRADE - FOR LEVEL APPLICATIONS ABOVE ONE METRE (FFL) CB20 - BALUSTRADE | TOEBOARD - FOR LEVEL APPLICATIONS ABOVE ONE METRE CB30 - BALUSTRADE | SINGLE INLINE HANDRAIL - FOR LEVEL AND STAIR APPLICATIONS ABOVE ONE METRE (FFL) CB35 - BALUSTRADE | SINGLE INLINE HANDRAIL & KERBRAIL - FOR LEVEL AND RAMP APPLICATIONS ABOVE ONE METRE (FFL) CB40 - BALUSTRADE | SINGLE OFFSET HANDRAIL - FOR LEVEL AND STAIR APPLICATIONS ABOVE ONE METRE (FFL) CB45 - BALUSTRADE | SINGLE OFFSET HANDRAIL & KERBRAIL - FOR LEVEL AND RAMP APPLICATIONS ABOVE ONE METRE (FFL) CB50 - BALUSTRADE | DOUBLE OFFSET HANDRAIL CB55 - BALUSTRADE | DOUBLE OFFSET HANDRAIL & KERBRAIL
This product has no warnings associated with it.
