Ideal for modern architectural homes, the Avon offers any combination of rail type and numerous potential finishes to suit your unique style. More rectangular top rails give the Avon a minimalist aesthetic often seen in mono-pitch rooves and metallic finishes. The Avon’s sleek design provides unobstructed views for occupants while allowing onlookers to appreciate the unique architectural style and design of the build.
Key features of this range include:
Avon balustrade style is designed for, but is not limited to, use in projects within the following scope:
B1.3.3 - Avon balustrade adheres with the minimum barrier height in respect to the location and building type (As per Table 3.1 minimum barrier heights). Stair barriers in areas likely to be frequently used by children under six years of age require no gaps larger than 100mm and 150mm in the stair tread. Balustrade geometry shall follow the dimensions illustrated barriers in figure 3.3 (Example of barrier geometries).
B1.3.4 - Avon balustrade style loading aligns with the barrier loads set out in AS/NZS 1170.1 Clause 3.6 and Table 3.3. The magnitude of the barrier loads that need to be applied in the design depends specifically on the occupancy of that part of the building or structure
B1.3.5 - Avon balustrade style displacement is recommended to not exceed 30mm under barrier and wind loads as described in B1/VM1.
B1.3.7 - Avon balustrade style fixings and connections are designed to be suitable for the supporting structure (material and strength), the fixing (type, edge distance and spacing) and to be adequate to resist balustrade loads.
B1.3.8 - Avon balustrade has a durability requirement of no less than 15 years.
B1.3.9 - Avon balustrade style has no sharp edges or projections than can cause injury when restraining people. All extrusions have minor radii and any sharp edges are to be removed.
B1.4.3 - Avon balustrade style uses aluminum that has been designed in accordance with AS/NZS 1170.0:2002 Appendix B. All product is powder coated or anodized to the specifiers standards to ensure the best durability of the product in the installed location.
B2.3 - Avon balustrade element "Balustrade" must have a durability requirement of no less than 50 years.
D1.1.7.1 - Avon balustrade prevents falling from access routes and complies with NZBC F4
D1.2.3.1 - Avon balustrade lower rail height is adjusted to where the surface of an accessible route is more than 25 mm above the adjacent ground to provide protection from falling.
F2.1.1 - Glazing likely subject to human impact shall comply with NZS 4223: Part 3.
F4.1.1 - Avon balustrade adheres to the minimum barrier heights (F4/AS1 Table 1) in the respective area installed
F4.1.2.1 - Avon balustrade aligns with the barrier height and geometry as set out in Table 1, Figure 2, figure 3 and figure 4. The barrier design ensures that, anywhere over the full height of the barrier, a 100 mm diameter sphere cannot pass through. In applications where the barrier is on a staircase or similar application, The triangular opening formed by the riser, tread, and bottom rail of the barrier on a stair shall be of such a size that a 150 mm diameter sphere cannot pass through it.
F4.1.2.3 - Avon style shall adhere to the acceptable methods of the construction of rail barriers in conjunction with parapets so they are not readily available to be used as seats, as required by Clause F4.3.4(h) for buildings other than housing.
F9.2.1 - The Avon balustrade can be used as a pool barrier when at the minimum height of 1200mm. Avon has been design to best relate to Figure 1 (b) and (d) balustrade to ensure compliance.
F9.2.4 - Avon adheres with appendices C, D, E & F which are acceptable methods for assessing the strength of pool barriers.
AS/NZS 1170:2002
NZS 4223.3.2016
NZS 3603
AS/NZS 1664
AS/NZS 2208
https://unex.co.nz/fabricators/fabrication-manuals/
AVON
This product has no warnings associated with it.