Edge Aluminium Post & Glass/Baluster Balustrade
Product Technical Statement: 109287
Edge is an aluminium post balustrade system, with glass or baluster options, for domestic settings
 |
Level of assurance needed to demonstrate NZ Building Code Compliance
Supporting documentation should include technical information by manufacturer and either a BRANZ or independent Appraisal or CodeMark
|
 |
Edge Aluminium Post & Glass/Baluster
confirms that this minimum level of assurance has been met or exceeded by the following:
Lautrec Technology Group Ltd
Producer Statement (PS1)
|
Technical Statement
Scope of use
Juralco Edge Balustrade is suitable for Domestic and Residential deck and balcony barriers, stairways, handrails, pool fencing and matching pool or stairway gates.
Edge Balustrade must only be installed in accordance with the Edge product manual. Any deviation from standard fabrication or installation must be accompanied by a site specific PS1.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.4(a)
- Clause B2 Durability: Performance B2.3.1(a)
- Clause F2 Hazardous building materials: Performance F2.3.3(a), F2.3.3(b)
- Clause F4 Safety from falling: Performance F4.3.1, F4.3.2, F4.3.3, F4.3.4(a), F4.3.4(b), F4.3.4(c), F4.3.4(d), F4.3.4(e), F4.3.4(f), F4.3.4(g), F4.3.4(h), F4.3.5(a), F4.3.5(b)
Notes
AS/NZS 1170:2002
NZS 4223.3.2016
NZS3603
AS/NZS 1664
AS/NZS 2208
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
Refer to Juralco Edge Balustrade specification and fabricators manual for design parameters and tables of maximum spans for wind zone from Low to Very High.
This specification details the documents the Juralco Edge Balustrade System refers to in relation to the New Zealand Building Code, the manufacturer's documents, products used in the System, requirements in relation to fixing and surface finishings.
Installation requirements
Juralco Edge Balustrade must only be installed in accordance with the Juralco Edge Balustrade System manual. Any deviation from that specified in the Edge balustrade manual must only be in accordance with the site specific PS1, with site specific calculations and drawings listing the non standard details.
The Juralco Edge Balustrade System must only be fabricated/installed by a Juralco approved fabricator.
Warrantees
Juralco Edge balustrade is warranted for 5 years.Dulux powder coating warranty is 10 years for Duralloy and 20 years for Duratec (surface integrity).
https://www.juralcobalustrades.co.nz/warranty/
Relationships
 |
New Zealand Made |
 |
Date last validated:
01 June 2023 |
 |
Date last updated:
01 June 2023 |
Disclaimer
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier.
Refer to the miproducts Terms and Conditions
|
|
