Technical Statement
Scope of use
Supply and install the selected Earthwool® glasswool insulation to walls,
floors, ceilings, roofs and other areas as identified on the drawings,
complete with accessories.
All aspects of this work shall be in
complete
accordance with Knauf Insulation product manuals and installation
guides, (check www.knaufinsulation.co.nz,
or call 0800 562 834 for the latest editions), Earthwool® glasswool
insulation, BRANZ Appraisal, other relevant product manufacturers'
recommendations, and as shown on the drawings.
No substitutions are permitted for Earthwool® glasswool insulation.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(a)
- Clause E3 Internal moisture: Performance E3.3.1
- Clause F2 Hazardous building materials: Performance F2.3.1
- Clause H1 Energy efficiency : Performance H1.3.1
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Earthwool glasswool insulation is an Acceptable Solution in terms of New Zealand Building Code Compliance.
Earthwool glasswool insulation thermal resistance (R-value) is declared in accordance with the requirements of AS/NZS 4859.1 which is an acceptable method.
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
Earthwool glasswool insulation: External wall segments provide a
cost-effective thermal and acoustic barrier for energy-efficient
construction.
The consistent quality, low dust, and clean-cutting
resilient fibres make fabrication easy and installation fast.
Earthwool
glasswool insulation: External wall segments can be used in timber and
metal frame applications. These applications
include thermal and acoustic treatments to walls, ceilings and floors.
Knauf
Insulation offers Earthwool glasswool insulation: External wall
segments in a wide range of sizes and R-values.
Earthwool glasswool
insulation can be used for cavity walls, floors, ceilings, attics,
basements and crawlspaces. It is highly resilient, recovering quickly to
full thickness. It also greatly reduces the transmission of noise in
the home.
Installation requirements
Installation of Earthwool glasswool insulation must be completed by an installer with an understanding of insulation installation, in accordance with the instructions given within the Technical Literature, Installation Instructions and BRANZ Appraisal.
Installation of Earthwool glasswool insulation must be in accordance with the Knauf Insulation’s Technical Literature, Installation Instructions and BRANZ Appraisal.
NZS 4246 should be used as a guide for installing insulation in residential buildings in New Zealand
The product must be installed only when the building is enclosed and when the construction materials have achieved the required maximum moisture content or less, to ensure the insulation does not become wet
Maintenance requirements
The building must be maintained weatherproof at all times.
If, during normal routine maintenance it is discovered that moisture has entered the building envelope, or that dampness has occurred because of leaking plumbing or some other source, then that source must be repaired immediately.
Wet or damp insulation must be removed and then replaced with new insulation of an equivalent thermal rating.
Cavities must be clean, dry and free of all contaminants and mould before fitting new insulation.
NZS 4246 Paragraph 3.3 gives guidance on thermal insulation maintenance due to water damage.
Warrantees
Knauf Insulation Pty Ltd (ACN 129 827 336) and Knauf
Insulation Ltd (Registered NZ Company No. 35 271 92) - (Knauf) - warrant that Earthwool®
glasswool insulation products (Product) are manufactured in accordance with AS/NZS-4859.1
and are fit for the purpose of insulating ceilings, external timber frame walls, underfloors
and internal acoustic partitions, if tested in accordance with the methodology referred to in
AS/NZS-4859.1, if properly installed in accordance with the installation instructions and if
maintained according to relevant Standards including AS-3999/NZS-4246.
Conditions apply - visit the following link for full warranty details and conditions:
https://pim.knaufinsulation.com/files/download/kinz0818745wa_knauf_-_earthwool_glasswool_warranty.pdf
Environmental
Earthwool® glasswool products are manufactured using recycled glass and have GreenRate™ Level A certification. GreenTag™ is a third party, green building product rating and certification system. Certification makes it easy for designers and building owners to gain rewards under Green Star and Homestar credits system.
Earthwool® glasswool has been certified by the International Living Futures Institute and has been awarded the Declare Red List Free label meaning that none of the raw materials used in its manufacture are on the International Living Futures Institute red list.
Earthwool® glasswool is also free from
CFCs, HCFCs and any other material with known ozone depletion potential and represents no known threat to the
environment.
Knauf Insulation's unique binder technology - ECOSE® Technology - is bio-based and is based on rapidly renewable materials, instead of petro-based chemicals. ECOSE® Technology results in up to 70% less embodied carbon than traditional binders used in alternative glasswool products.
Quality Assurance
 |
ISO 9001 (Quality Management) |
Relationships
 |
Member of New Zealand Green Building Council |
 |
EcoSpecifier Global GreenTag
Level A |
 |
Eurofins
Gold level - No Iacg-323-01-25-2022 |
 |
International Living Futures Institute
Declare Red List Free - No. KNF0043 |
 |
Warrington Fire - Certifire
Non-combustible - No. AC100.1 |
