The Ventüer VL-50CM is designed primarily as a screening louvre and provides a low pressure drop allowing maximum airflow with minimum mechanical assistance. It has very low rain defence effectiveness and should not be used where protection from wind driven rain is required.
The VL-50CM louvre blades are supported on a concealed mullion system, and bordered by a 150mm perimeter frame. It shares the same support frame as the high-performing VL-3SD and VL-2SD systems, and can be combined with these products to provide cost saving configurations. The standard frame can be fixed in to a wide range of primary support structures and cladding types, including profiled metal cladding, fibre cement sheet, window joinery systems and others.
It can be fitted with a sealed solid backing panel to provide a water-tight rainscreen in areas where the louvres are inactive, or not required for air flow. It can also be fitted with bird or insect mesh.
