Viking Roofspec Viking GM Torch-on Membrane Systems – Gemini APP, Lybra SBS and Pheonix Super APAO

Product Description

Bituclad Waterproofing Membranes are waterproofing membranes for nominally flat, pitched and curved roofs, gutters and parapets. They are installed as a multi-layer system with a mineral chip finished product or as a single layer system onto a concrete substrate under heavy protection such as paving slabs or a topping screed. The products are supplied as torch-on, reinforced, polymer-modified bitumen sheets in roll form. Bituclad Waterproofing Membranes have been appraised as roof waterproofing membranes on buildings within the following scope: • the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with respect to building height and maximum floor plan areas; and, • with building structures designed and constructed to meet the requirements of the NZBC; and, • with roof supporting structures of timber framing with substrates of plywood; and, • with substrates of suspended concrete slabs; and,

Scope of use

These torch-on membranes are suited to tricky/confined roofs seeing they can be “formed” in to tight corners and awkward areas susceptible to leaks. They are suitable for low-slope roofs (flat or curved), gutters and parapets, waterproofing beneath a floating deck, inland and coastal conditions, commercial buildings and homes.

Viking Gemini APP, Lybra SBS and Phoenix Super APAO Waterproofing Membranes have been assessed as roof waterproofing membranes on buildings within the following scope:

• The scope limitations of NZS 3604:2011 and NZBC Acceptable Solution E2/AS1,Paragraph 1.1; or, Complies with E2 as an Alternative Solution
• The scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with regards to building height and floor plan area when subject to specific structural design; and,
• Situated in NZS 3604:2011 Wind Zones, up to and including Extra High; and,
• With substrates of plywood or suspended concrete slab; and,
• With a minimum fall for roofs of 1:30 (2 degrees).

Viking Gemini APP, Lybra SBS and Phoenix Super APAO Waterproofing Membranes have also been assessed for use as roof waterproofing membranes on buildings within the following scope:

• Subject to specific structural and weather tightness design situated in wind pressures up to a maximum design differential ultimate limit state (ULS) of 6 kPa; and,
• With substrates of plywood or suspended concrete slab. 

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

• Clause B1 Structure: Performance B1.3.1, B1.3.4, B1.3.4(b), B1.3.4(c), B1.3.4(d), B1.3.4(e)
• Clause B2 Durability: Performance B2.3.1, B2.3.1(b)
• Clause E2 External moisture: Performance E2.3.1, E2.3.2, E2.3.7, E2.3.7(b), E2.3.7(c)
• Clause F2 Hazardous building materials: Performance F2.3.1

Notes

Please refer to Viking GM Mercury FC PTS for below-ground waterproofing and Viking GM General Garden FLL Antirootfor roof gardens.

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:

Please refer to the BRANZ certificate attached for all evidence of compliance.

Supporting evidence

The product has and can make available the following additional evidence to support the above statements:

	CodeMark .
	BRANZ Appraisal 948 (2017)

Use in Service History

.

Product Criteria

Design requirements

Product specification and incorporation of the Viking Gemini APP, Lybra SBS and Phoenix Super APAO Waterproofing membranes into the building design shall be carried out by a designer/architect/engineer or a building professional who: Is qualified to design the buildings covered under the ‘Scope’ of use of this product, and; has ready access to the technical specifications including installation details and standards. Viking Gemini APP, Lybra SBS and Phoenix Super APAO systems comes with a range of accessories including sumps, scuppers and overflows, diverters, droppers and Architectural Finishing Series of flashing and termination bars. 

Installation requirements

Installation shall be carried out by a Viking Roofspec trained and licensed installer. Installation shall be undertaken in accordance with all relevant technical information related to the selected installation method, including information contained within the, the Code of PRACTICE for Torch-on Membrane Systems for Roofs, 1st Edition, October 2008. Long term properties of the material may be affected by contact with petroleum-based products such as oils, greases and solvents. 

Maintenance requirements

The membrane roof system must be regularly (at least annually) checked for damage, rubbish, debris and following contractor Damages, such as small punctures and tears must be repaired as recommended by Viking Roofspec. Special care must be taken when inspecting the membrane roof systems to ensure the continuing prevention of moisture ingress, and repairs must be undertaken where required. Drainage outlets must be maintained to operate effectively.

Warrantees

The Viking Gemini APP & Lybra SBS system are backed by a 20 year product warranty Viking Phoenix Super APAO System is backed by a 25 year warranty. For specific projects, all three system types can be eligible to be covered by Viking’s Full System Warranty. This warranty covers the product and installation in one document, for a 20 year period. Special conditions apply.

Company Product Information

Environmental

Bitumen is a bi-product of the oil refining process. Torch-on membranes provide a constructive use of this waste product. The robust nature of a modified bitumen membrane system will ensure sustainability through longevity. A Viking General Membrane Torch-on roof can be overlaid at the end of its useful life, avoiding the dumping of the old roof and the filling of landfills with inorganic waste.  

Quality Assurance

ISO 9001 (Quality Management)

Relationships

Member of New Zealand Green Building Council

Videos