Sto Poren Brick Veneer Cladding System

Scope of use

The StoPoren Brick Veneer Cladding System has been appraised for use as a veneer cladding system for buildings within the following scope:

• the scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 in terms of floor area, with a maximum of two stories; and,
• with a maximum height of brick veneer of 7.5 m above the supporting foundation, except that at gable ends and some piers this height may be up to 10.0 m, and a maximum height of 4.0 m above a roof line or 7.5 m above an adjacent building foundation, whichever is the lesser; and, with a depth of cavity of between 40 mm and 75 mm; and,
• with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1 Table 2; and,
• with timber framing constructed on slab-on-ground in accordance with NZS 3604 for brick veneer and/or concrete masonry foundation constructed in accordance with NZS 4229; and,
• situated in NZS 3604 Wind Zones up to and including Extra High.  

The StoPoren Brick Veneer Cladding System is appraised for use with aluminium window and door joinery that is installed with vertical jambs and horizontal heads and sills. 

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

• Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.3(a), B1.3.3(f), B1.3.3(h), B1.3.3(j), B1.3.3(q), B1.3.4
• Clause B2 Durability: Performance B2.3.1(b), B2.3.1(c), B2.3.2
• Clause C3 Fire affecting areas beyond the fire source: Performance C3.7
• Clause E2 External moisture: Performance E2.3.2
• Clause F2 Hazardous building materials: Performance F2.3.1

Notes

The StoPoren Brick Veneer Cladding System meets the requirements of Performance B2.3.1 (b), 15 years for the cavity system, Poren bricks and render system, and the requirements of Performance B2.3.1 (c), 5 years for the exterior paint system.

The StoPoren Brick Veneer Cladding System will not present a health hazard to people. 

Supporting evidence

The product has and can make available the following additional evidence to support the above statements:

	BRANZ Appraisal 488 (2006)

Product Criteria

Design requirements

The StoPoren Brick Veneer Cladding System is expected to have a serviceable life of at least 30 years provided the system is maintained in accordance with the Sto Specification, Warranty and BRANZ Appraisal and the Poren bricks, Poren lintels, brick ties, fixings and render system are continuously protected by a weathertight coating and remain dry in service.

Studs must be at maximum 600 mm centres in Low, Medium, High and Very High Wind Zones and at maximum 400 mm centres in the Extra High Wind Zone.

The StoPoren Brick Veneer render and finishing system has a peak heat release rate less than 100 kW/m2 and a total heat released less than 25 MJ/m2. The system is suitable for use on buildings with a SH Risk Group classification, at any distance to the relevant boundary. Refer to NZBC Acceptable Solutions C/AS2 – C/AS6, Paragraph 5.8.1 for the specific exterior surface finishes requirements for other building Risk Groups.

For a breakdown of the system components, click here.  

Installation requirements

Installation and finishing of components and accessories supplied by Stoanz Limited and the Sto registered contractor must be completed by trained applicators, approved by Stoanz Limited.

Installation of the accessories supplied by the building contractor must be carried out in accordance with the StoPoren Brick Veneer Technical Literature and the BRANZ Appraisal by, or under the supervision of a Licensed Building Practitioner (LBP) with the relevant Licence Class.

Maintenance requirements

Regular maintenance is essential to ensure the performance requirements of the NZBC are continually met and to ensure the maximum serviceability of the system. Carry out an annual inspection and record this on the Sto Construction Systems Maintenance schedule.

Regular cleaning (at least annually) of the paint coating is required to remove grime, dirt and organic growth and to maximise the life and appearance of the coating. Grime may be removed by brushing with a soft brush, warm water and detergent. The paint system must be recoated at approximately 8-10 yearly intervals in accordance with Stoanz Limited instructions. Clear sealer systems require recoating at 5-7 yearly intervals.

Warrantees

With an increasing emphasis on the implementation of servicing exterior building elements, Sto has launched the StoArmat 20 Year Warranty and StoService Assurance documentation. This system, administered by Sto and carried out by Sto Contractors, ensures all specified StoArmat Rendered Systems are registered, serviced and certified every two and a half years to provide assurance that all building elements pertaining to the rendered facade are performing.

Refer to the StoArmat Warranty Document by clicking here.

Company Product Information

Environmental

Protecting the natural basis for life and improving quality of life are important aims in social policy. Sto actively pursues these aims, always acting in accordance with the company's guiding principle: "Building with conscience."  

In order to define and implement its ecological targets, Sto has developed a system of environmental management conforming to international standards. This relates to the entire process chain – from the procurement of the raw product, to production, packaging and logistics.

Quality Assurance

ISO 9001 (Quality Management)