Technical Statement
Scope of use
The StoArmour Facade Panel System has been appraised by BRANZ as an
external wall cladding system for buildings within the following scope:
-
the
scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1; and,
- with
a risk score of 0-20, calculated in accordance with NZBC Acceptable
Solution E2/AS1, Table 2; and,
- situated
in NZS 3604 Wind Zones up to, and including Extra High.
The StoArmour Facade Panel System has also been appraised for
weathertightness and structural wind loading when used as an exterior wall
cladding for buildings within the following scope:
-
the
scope limitations of NZBC Acceptable Solution E2/AS1, Paragraph 1.1 with
regards to building height and floor plan area; and,
- constructed
with timber and steel framing subject to specific engineering design; and,
- situated
in specific design wind pressures up to a maximum design differential
ultimate limit state (ULS) of 2.5 kPa.
The StoArmour Facade Panel System must only be installed on vertical
surfaces (except for tops of parapets, sills and balustrades).
The system is appraised for use with aluminium window and door joinery
that is installed with vertical jambs and horizontal heads and sills.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.3(a), B1.3.3(h), B1.3.3(j), B1.3.3(q), B1.3.4
- Clause B2 Durability: Performance B2.3.1(b), B2.3.1(c), B2.3.2
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.7
- Clause E2 External moisture: Performance E2.3.2
- Clause F2 Hazardous building materials: Performance F2.3.1
Notes
The StoArmour Facade Panel System meets the requirements of Performance
B2.3.1(b) 15 years for the render, panel and cavity system, and the requirements
of Performance B2.3.1(c) 5 years for the paint finish.
The StoArmour Facade Panel System will not present a health hazard to
people.
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
The StoArmour System is expected to have a serviceable life of at least
30 years provided the system is maintained in accordance with the Sto
Specification, Warranty and BRANZ Appraisal, and the StoPoren panels, fixings
and renders are continuously protected by a weathertight coating and remain dry
in service.
Studs must be at maximum 600mm centres for buildings situated in wind pressures up to an including design differential 2.5 kPa ULS. Dwangs must be fitted flush between the studs as required for the fixing of internal linings.
The Sto render systems have a
peak heat release rate less than 100 kW/m2 and a total heat released less than
25 MJ/m2, achieving a Type A performance. The system is therefore suitable for use within 1 m of the boundary.
For a breakdown of system components, click here.
Installation requirements
Installation and finishing of components and accessories supplied by
Stoanz Limited and the Sto registered contractor must be completed by trained
applicators, approved by Stoanz Limited.
Installation of the accessories supplied by the
building contractor must be carried out in accordance with the StoArmour Facade Panel Technical Literature and the BRANZ Appraisal by, or under the supervision of a
Licensed Building Practitioner (LBP) with the relevant Licence Class.
Maintenance requirements
Regular maintenance is essential to ensure the performance requirements
of the NZBC are continually met and to ensure the maximum serviceability of the
system. Carry out an annual inspection and record this on the StoService Maintenance schedule.
Regular cleaning
(at least annually) of the coating is required to remove grime, dirt and
organic growth and to maximise the life and appearance of the coating. Grime may
be removed by brushing with a soft brush, warm water and detergent. The
paint system must be recoated at approximately 8-10 yearly intervals in
accordance with Stoanz Limited instructions. Clear sealer systems require
recoating at 5-7 yearly intervals.
Warrantees
With an increasing emphasis on the implementation of servicing exterior
building elements, Sto offers the StoArmat 20 Year Warranty and
StoService Assurance documentation. StoService Assurance is a guide for maintaining your property. It includes cleaning and checks to ensure the exterior facade and building elements remain functional and in good condition, long-term. It also ensures the property is maintained in accordance with New Zealand building legislation, manufacturers requirements and to the owners satisfaction.
Refer to the StoArmat Warranty Document by clicking here.
Environmental
Protecting the natural basis for life and improving
quality of life are important aims in social policy. Sto actively
pursues these aims, always acting in accordance with the company's
guiding principle: "Building with conscience."
In order to define and implement its ecological targets, Sto has
developed a system of environmental management conforming to
international standards. This relates to the entire process chain – from
the procurement of the raw product, to production, packaging and
logistics.
Quality Assurance
 |
ISO 9001 (Quality Management) |
