Narrow your search

SUPPLIERS
BRANDS

Search Result for Tanking and pre-cladding » Viking Roofspec Peel & Stick Waterproofing Membrane

Viking Roofspec Peel & Stick Waterproofing Membrane

Product Technical Statement: 106472

Underground waterproofing system providing protection from water ingress for below-ground structures

Level of assurance needed to demonstrate NZ Building Code Compliance
Supporting documentation should include technical information by manufacturer and either a BRANZ or independent Appraisal or CodeMark

Viking Roofspec confirms that this minimum level of assurance has been met or exceeded by the following:
BRANZ Appraisal
826 (2019)

	Download/Print PTS
		Additional information is available to support this PTS. View it here
	Send to friend

Technical Statement

Scope of use

Viking Peel & Stick Membrane has been appraised as a DPM for use:

On buildings subject to non-specific design complying with NZS 3604 behind concrete masonry basement walls complying with NZS 4229; and,
On buildings subject to specific design with substrates of in situ or precast concrete complying with NZS 3101 or concrete masonry complying with NZS 4230 and 4210; and,
Where subsoil drainage and free draining granular back fill has been placed behind basement walls.

Viking Peel & Stick Membranes must be adequately protected against damage during back filling and in service.

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Clause B1 Structure: Performance B1.3.1
Clause B2 Durability: Performance B2.3.1, B2.3.1(a), B2.3.2, B2.3.2(a)
Clause E2 External moisture: Performance E2.3.3
Clause F2 Hazardous building materials: Performance F2.3.1

Supporting evidence

The product has and can make available the following additional evidence to support the above statements:

	BRANZ Appraisal 826 (2019)

Product Criteria

Design requirements

Product specification and incorporation of Viking Peel & Stick Membranes into the building design shall be carried out by a designer/architect/engineer or a building professional who:

Is qualified to design the buildings covered under the 'Scope' of use of this product.
Has ready access to the technical specifications including installation details and standards referenced in the BRANZ Appraisal No. 826 where the design limitations are outlined for the scope of this PTS.

Accessories that are part of the Viking Peel & Stick system include bituminous primer (19L), liquid mastic sealant (750ml), protection boards and drainage boards.

Installation requirements

Installation shall be carried out by a Viking Roofspec trained and licensed installer.
Installation shall be undertaken in accordance with all relevant technical information related to the selected installation method, including information contained within the BRANZ Appraisal No. 826 (2014).

Maintenance requirements

Annual inspections must be made of the membrane's termination bar and sealant and protection, the backfill capping, and the drainage pipe to ensure all are functioning as originally designed.
If required, the drainage pipe must be cleared to remove any sediment or silt build-up. The slope of the backfill capping must be maintained at all times.
Long term properties of the material may be affected by contact with petroleum-based products such as oils, greases and solvents.

Warrantees

The Viking Peel & Stick System is backed by a 20-year product warranty.

Company Product Information

Quality Assurance

ISO 9001 (Quality Management)

Relationships

Member of New Zealand Green Building Council

Date last validated: 07 July 2020

Date last updated: 07 July 2020

Disclaimer
The Product Technical Statement (PTS) template is copyright to Construction Information Limited. However the content of this PTS is the responsibility of the product manufacturer/supplier. Refer to the miproducts Terms and Conditions

Product Information Links
	Drawings
	Technical Data
	Environmental Information
	Installation Instructions
	Maintenance
	MSDS


Brand:	Viking Roofspec
Company:	Viking Roofspec
Physical Address:	80 Alexander Crescent Otara AUCKLAND
Postal Address:	PO Box 14541 Panmure AUCKLAND
Telephone:	09 2729709
Fax:	0800 729788
Free Phone:	0800 729799
Email:
Website:	http://www.vikingroofspec.co.nz/catalog/product/waterproof-tanking-systems

Viking Roofspec

Distributors of a wide range of roofing and waterproofing systems for the construction industry in New Zealand and the South Pacific. This range includes world-class, single-ply and 2-layer membrane systems for low pitch areas, and premium pitched roofing systems- all applied by our experienced Viking Approved Applicator network.

Products

	Viking Bituclad (Modified Bitumen) Waterproofing Membrane
	Viking Butylclad Rubber Waterproofing Membrane
	Viking CertainTeed Asphalt Shingles
	Viking Dec-K-ing (PVC) Waterproofing Membrane
	Viking EcoStar Roof Tiles
	Viking Enviroclad (TPO) Waterproofing Membrane
	Viking Enviroclad FBS (Fleece-backed System) Membrane
	Viking Epiclad (EPDM) Rubber Waterproofing Membrane
	Viking Epiclad FBS (EPDM Fleece-backed) Rubber Waterproofing Membrane
	Viking Roof Gardens
	Viking Warm Roofs