Technical Statement
Product Description
Scope of use
Pipe collars are designed to be exposed in a wall or floor application (i.e. face fixed). The collars should always be fixed to the underneath of the concrete floor. In wall situations one collar should be used on each exposed side of the fire rated wall.
Allproof fire collars are to be installed only as tested. Please refer to Fire collar literature for test results and install drawings on Allproof's website allproof.com.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause C3 Fire affecting areas beyond the fire source: Performance C3.9
- Clause C4 Movement to place of safety: Performance C4.3
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Please refer to our product and testing literature here.
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
Allproof Fire collars are a highly respected product stocked in most plumbing merchants and are widely used by the industry.
Product Criteria
Design requirements
Please see installation guidelines in Allproof supporting documentation.
Installation requirements
Fire Collars must be installed as per Allproof supporting documentation. please view Allproof Fire Brochure for installation requirements.
Collars must be face fixed on wall or floors and must be installed using correct fixings as shown in literature.
Warrantees
Please see Allproof Warranty document here.
Relationships
 |
New Zealand Made |
 |
Date last validated:
30 October 2019 |
 |
Date last updated:
30 October 2019 |