Technical Statement
Product Description
Scope of use
Edgetec JH Clamp Balustrade is suitable
for internal or external settings, including: Domestic and
Residential deck and balcony barriers, stairways, handrails, pool fencing
and matching pool gates. Offices and
work areas not included elsewhere including storage areas and Residential or
Commercial area without obstacles for moving people and not susceptible to
overcrowding.
Edgetec JH Clamp Balustrade must only be
installed in accordance with the Edgetec JH Clamp product manual. Any deviation
from standard fabrication or installation must be accompanied by a site
specific PS1.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.4(a)
- Clause B2 Durability: Performance B2.3.1(a)
- Clause F2 Hazardous building materials: Performance F2.3.3(a), F2.3.3(b)
- Clause F4 Safety from falling: Performance F4.3.1, F4.3.2, F4.3.3, F4.3.4(a), F4.3.4(b), F4.3.4(c), F4.3.4(d), F4.3.4(e), F4.3.4(f), F4.3.4(g), F4.3.4(h), F4.3.5(a), F4.3.5(b)
Notes
AS/NZS 1170:2002
NZS 4223.2016
NZS 3603
AS/NZS 1664
AS/NZS 2208
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Product Criteria
Design requirements
Refer to Juralco JH Clamp Balustrade specification and fabricators manual for design parameters and tables of maximum spans for wind zone from Low to Very High.
This specification details the documents the Juralco JH Clamp Balustrade System refers to in relation to the New Zealand Building Code, the manufacturer's documents, products used in the System, requirements in relation to fixing and surface finishings.
Installation requirements
Juralco JH Clamp Balustrade must only be installed in accordance with the Juralco JH Clamp Balustrade System manual. Any deviation from that specified in the JH Clamp balustrade manual must only be in accordance with the site specific PS1, with site specific calculations and drawings listing the non standard details.
The Juralco JH Clamp Balustrade System must only be fabricated/installed by a Juralco approved fabricator.
Relationships
 |
New Zealand Made |
 |
Date last validated:
27 August 2019 |
 |
Date last updated:
27 August 2019 |