Compliance Statement
Scope of Use
- Door Thickness: 34-46 mm (specify at time of order)
- Handle Size: 181 x 81 mm
- Door Protrusion: 100 mm
- Suitable Door Types: Timber, Aluminium, Steel
- Configuration Options: Passage, Snib/Snib, Snib/Emergency Release
- Finishes: Satin Chrome, Satin Nickel, Chrome, Oil Rubbed Bronze, Matte Black
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(c)
Performance B2.3.1 (c) 5 years. - Clause D1 Access routes: Performance D1.3.4(f)
CS EasyOpen complies with NZBC Acceptable Solution D1/AS1, Paragraph 7.0.5 and the minimum clear opening and door handle requirements of NZS 4121. The unit has a minimum clear opening width of 760 mm, the door handle is fitted by CS For Doors at a height between 900 mm and 1,200 mm above the floor, and is lever action with the end turned towards the door.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Lifemark Appraisal Report CL400 ADA Magnetic - November 2017
Design requirements
Suitable for cavity slider and surface slider doors. Choose from Passage, Passage with magnet, Privacy, Bi-Parting configurations
Installation requirements
For compliance with NZS 4121:2001, the centre of the handle should be positioned between 900mm and 1200mm (1000mm optimal) above the finished floor level. The door needs to be at least 910mm wide to allow minimum clear walk through of 760mm. There must be 45mm of clear space from the edge of the pull handle to the nearest door jamb when the door is both fully open and completely closed. A flat closing jamb is recommended. The supplied ‘Down to Lock’ label must be positioned as close as possible to the handle. Consult local standards for guidelines relating to the specific project.
Maintenance requirements
Clean door hardware only with mild soap and water. Do not use chemicals or solvents.
Manufacturer
Legal Trading Name:
CS Cavity Sliders
Business Email:
info@cavitysliders.co.nz
Contact Number/s:
09 2760800
0800 754337
Product Identifier
CL406A0125 (PASSAGE), CL406A0128 (PASSAGE WITH MAGNET), CL406B0125 (SNIB/SNIB) CL406B0128 (SNIB RH), CL406B0129 (SNIB LH)
Warnings
This product has no warnings associated with it.
 |
Date last validated:
14 January 2025 |
 |
Date last updated:
14 January 2025 |
|