Compliance Statement
Scope of Use
- Is suitable for use as an interior floor, wall & ceiling covering.
- Is suitable for high-traffic areas.
- Is suitable for use with underfloor heating systems.
- Is suitable for use in wet areas such as kitchens and laundries.
- Is suitable for use in both residential and commercial applications.
- Has a critical radiant flux of 5.8kW/m² making it suitable for use in all buildings and areas of those buildings areas with C 3.4 (b)obligations.
- Is suitable for providing additional sound reduction for floors with adjoining tenancies if installed as part of an acoustic system using Provent Underlay or WoodClinic Recycled Rubber Acoustic Underlay.
- Is not recommended for use in wet areas such as bathrooms.
- Is not suitable for exterior use.
- Is expected to change colour with UV exposure, this is not considered a defect but a natural occurrence.
- Must be acclimatised to reach equilibrium with the area that it is to be installed.
- Must be cleaned and maintained in accordance with the VidaCare Guide.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1, B2.3.1(c)
Contribution to B2.3.1(c)(i) and (ii): Parky Pro Specification has a 5 Year Wear Resistance Warranty for Low Commercial use& a 15 Year Wear Resistance Warranty for residential use. Parky Summit Specification has a 10 Year Wear Resistance Warranty for Low Commercial use & a Limited Lifetime Year Wear Resistance Warranty for residential use. Parky Pro Plank has a wear resistance of ≥2000revolutions and a resistance to indentation rating of ≥30N/mm. Parky Summit Plank has a wear resistance of ≥6000 revolutions and a resistance to indentation rating of ≥40N/mm. Refer to the warranty documentation for further information. VidaSpace also provides and recommends a cleaning system range called WoodClinic. - Clause C3 Fire affecting areas beyond the fire source: Performance C3.4, C3.4(b)
Contribution to C3.4(a) and (b): Parky has a Cfl-S1 reaction to fire rating which is classified as ‘flame-retardant’. It also has a CRF rating of 5.8kW/m2. This allows Parky to be used in all flooring applications. Parky has a rating of Group 3 but can achieve a Group 1-S rating for use on walls and ceilings when an intumescent coating is applied such as Zone 92. - Clause D1 Access routes: Performance D1.3.3, D1.3.3(d)
Contribution to D1.3.3: Parky has a slip resistance rating (SRV) of 62(dry)/47(wet) and can be used in areas where a rating of 62(dry)/47(wet) or less is required. When combined with an appropriate nosing, Parky can be used in commercial stair applications. Refer to the VidaSpace Stair Design Guide for further information. - Clause E3 Internal moisture: Performance E3.3.3, E3.3.5, E3.3.6
Contribution to E3.3.3, E3.3.5, E3.3.6: Parky has a lacquer coating system that is impervious and easily cleaned. D4 PVA can be used in the joins 1.5m from sanitary fixtures and around the perimeter to show compliance to E3. Suitable for use in kitchens, laundries & powder rooms - refer to the E3 documentation (VidaSpace NZ Building Code Compliance Guide). - Clause F2 Hazardous building materials: Performance F2.3.1
Contribution to F2.3.1: Parky is safe when handled, has no added formaldehyde, and achieves an E1 Formaldehyde Emission rating. - Clause G6 Airborne and impact sound: Performance G6.3.1, G6.3.2
Contribution to G6.3.1, G6.3.2: Parky can be installed on acoustic underlay as a system suitable for multi-tenanted buildings. Refer to the build-up guide documents and Acoustic test documents. Provent Underlay is the recommended option for Floating Installation. WoodClinic Recycled Rubber Acoustic Underlay is the recommended underlay to be used for Glue Down Installation which helps exceed STC55 and IIC55 if needed in a multi-tenanted building.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
B2 Durability — B2.3.1 (c)
C3 Fire affecting areas beyond the fire source — C3.4 (b)
D1 Access Routes — D1.3.3 (d)
E3 Internal moisture — E3.3.3, E3.3.5, E3.3.6
F2 Hazardous building materials — F2.3.1
G6 Airborne and impact sound — G6.3.1, G6.3.2
Design requirements
Parky is a prime-grade veneer timber flooring product that is suitable for residential and commercial applications. Manufactured in Belgium, constructed using a 0.6mm European oak wear layer and HDF core. Parky comes in 10 colours, finished in a lacquer coating and is available in two profiles.
Installation requirements
- We recommend Parky timber floors are installed by an experienced timber floor installer, with certifications such as ATFA
- All Parky timber floors must be installed in accordance with:
a. Our Parky Uniclic Profile Installation Guide - Floating Installation
b. Our Parky Unifit X Profile Installation Guide - Floating Installation
c. Our Glue Down Installation Guide - Engineered Wood Flooring
- All downloads can be found here - www.vidaspace.co.nz/downloads-resources#Installation
- All Parky timber floors must be installed in accordance with VidaSpace NZ Building Code Compliance Guide for Timber Flooring - Ver 004
- If installing Parky on Walls or Ceilings it must be installed in accordance with our T&G Timber Installation Guide - Internal Walls &Ceilings
- Specify the correct Flooring Installation products using our Masterspec Work Section 6312VS VidaSpace Timber Overlay Flooring System
Maintenance requirements
Maintenance is necessary for this product’s ongoing compliance. Please refer to the latest version of our VidaCare Guide for in-Depth cleaning and maintenance instructions that can be found here - www.vidaspace.co.nz/downloads-resources#Care-Maintenance
Manufacturer
Legal Trading Name:
Decospan Holding NV
Business Email:
info@decospan.com
Contact Number/s:
+64 06 9296564
0800119388
Importer
Legal Trading Name:
VidaSpace Limited
Business Email:
hello@vidaspace.co.nz
Contact Number/s:
06 9296564
0800 119388
Product Identifier
VS2701 MILK OAK
VS2702 IVORY OAK
VS2703 ESSENCE OAK
VS2704 NATURAL OAK
VS2705 DESERT OAK
VS2706 DUNE OAK
VS2713 MOUNTAIN OAK
VS2707 VALLEY OAK
VS2709 SMOKED WALNUT
VS2711 FROZEN WALNUT
Warnings
This product has no warnings associated with it.
 |
Date last validated:
11 April 2024 |
 |
Date last updated:
11 April 2024 |
|