Unex Henley Fin Style Balustrade

B1.3.3 - Henley balustrade adheres with the minimum barrier height in respect to the location and building type (As per Table 3.1 minimum barrier heights). Stair barriers in areas likely to be frequently used by children under six years of age require no gaps larger than 100mm and 150mm in the stair tread. Balustrade geometry shall follow the dimensions illustrated barriers in figure 3.3 (Example of barrier geometries).

B2.3 - Henley balustrade element "Balustrade" must have a durability requirement of no less than 50 years. 

D1.1.7.1 - Henley balustrade prevents falling from access routes and complies with NZBC F4

D1.2.3.1 - Henley balustrade lower rail height is adjusted to where the surface of an accessible route is more than 25 mm above the adjacent ground to provide protection from falling.

D1.6.0.6 - Henley balustrade top rail is used as a handrail is applications where required, the height of the rail is situated between 900mm and 1000mm above the pitch line/FFL.

D1.6.0.9 - Henley balustrade handrail options come in a range of sizes and provide acceptable profiles for accessible stairways and ramps.

F4.1.1 - Henley balustrade adheres to the minimum barrier heights (F4/AS1 Table 1) in the respective area installed

F4.1.2.1 - Henley balustrade aligns with the barrier height and geometry as set out in Table 1, Figure 2, figure 3 and figure 4. The barrier design ensures that, anywhere over the full height of the barrier, a 100 mm diameter sphere cannot pass through. In applications where the barrier is on a staircase or similar application, The triangular opening formed by the riser, tread, and bottom rail of the barrier on a stair shall be of such a size that a 150 mm diameter sphere cannot pass through it.

F4.1.2.2 - In areas used exclusively for emergency or maintenance purposes in buildings, and in other buildings not frequented by children, barriers may have openings with maximum dimensions of either: 300mm horizontally between vertical balustrade members or 460mm vertically between longitudinal rails.

F4.1.2.3 - Henley style shall adhere to the acceptable methods of the construction of rail barriers in conjunction with parapets so they are not readily available to be used as seats, as required by Clause F4.3.4(h) for buildings other than housing.F9.2.1 - The Henley balustrade can be used as a pool barrier when at the minimum height of 1200mm. Henley has been design to best relate to Figure 1 (b) and (d) balustrade to ensure compliance.

F9.2.4 - Henley adheres with appendices C, D, E & F which are acceptable methods for assessing the strength of pool barriers.