Compliance Statement
Scope of Use
The Stratco Frontier Carport is a simple, well designed, freestanding carport, verandah and patio system that is economical and is excellent value for money. It has an unpainted finish and is made with a strong and durable steel frame design, sturdy C section beams and Superdek® roof sheeting.
The Stratco Frontier is 2.400m high and available in two sizes, Single: 3.1m wide x 5.5m long and Double: 5.4m wide x 5.5m long
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.3(b), B1.3.3(c), B1.3.3(f), B1.3.3(g), B1.3.3(h), B1.3.3(j), B1.3.4, B1.3.4(a), B1.3.4(b), B1.3.4(c), B1.3.4(d), B1.3.4(e)
Stratco Frontier Carport meets the performance requirements of B1.3.1, B1.3.2, B2.3.3 (b, c, f, g, h, j), and B1.3.4.
- Clause B2 Durability: Performance B2.3.1, B2.3.1(b)
B2.3.1 (b) 15 years - Clause E2 External moisture: Performance E2.3.1
Roofs must shed precipitated moisture. In locations subject to snowfalls, roofs must also shed melted snow.
- Clause F2 Hazardous building materials: Performance F2.3.1
Stratco Frontier Carport systems are manufactured from Zinc/alum based Pre-Painted sheet metal will meet the performance requirement of F2.3.1. - Clause G12 Water supplies: Performance G12.3.2, G12.3.2(a), G12.3.2(b), G12.3.2(c)
Stratco Frontier Carport roof systems are manufactured from Zinc/alum based metal tested in accordance with AS/NZS 4020:2005 passed the requirements for products in contact with drinking water.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Metallic coated Galvanised and Zinc/alum coated steel substrate conforms with AS 1397:2011.
All Stratco Frontier Carport systems are supported by in-house engineering that is reviewed and certified by independent structural engineers. Producer Statements for Stratco Frontier Carport systems are available on request
Stratco Frontier Carport systems meet the requirements of NZ Building Code NZS 3604:2011—Wind Loads Low, Medium and High Wind Zones and Roof snow load limited to areas with less than 0.7kPa as noted in AS/NZS1170.3: 2003 fig 2.2
Design requirements
Stratco Frontier Carport is 2.400m high and available in Single and Double sizes
Single Carport— 3.1m wide x 5.5m long
· Double Carport— 5.4m wide x 5.5m long
Complete kit includes: Superdek® roof sheeting, barge capping, SHS columns/posts, C-Section beams, gutter and stop ends and downpipe (including bracket and elbow). On select Frontier designs intermediate beam– bridging and purlin included
Ensure Stratco Frontier Carport systems are suitable for the location it is to be used in to ensure it meets the minimum durability requirements of the NZ Building Code and satisfy customer expectations. The boundaries of different corrosion zones in New Zealand are difficult to define because many factors determine the corrosivity of a particular location. Contact your nearest Stratco to confirm suitability for your location.
Installation requirements
Full installation instructions available at www.stratco.co.nz/nz/patios/frontier-carport/
Maintenance requirements
Stratco Frontier Carport can be manually washed by either water and a sponge or a soft nylon brush or by water blasting at pressures of no more than 20MPa. Never use abrasive or solvent based cleaners such as turps, petrol or kerosene.
Manufacturer
Legal Trading Name:
Stratco
Business Email:
technical@stratco.co.nz
Company Website:
www.stratco.co.nz
Contact Number/s:
03 3389063
0800 787282
Product Identifier
FRONTIER CARPORT
Warnings
This product has no warnings associated with it.
 |
Date last validated:
30 April 2024 |
 |
Date last updated:
30 April 2024 |
|