Compliance Statement
Scope of Use
Hallmark Europa Fire Doors, for use as fire rated
doorsets with a maximum achievable fire rating of up to 240min (Integrity) and
a 60min Insulation rating where required. Manufactured with E-Core® solid
vermiculite mineral core. Available as single or double doors, hinged or double
action pivot.
Hallmark Europa Fire Doors are custom fabricated to
the requirements of each project including door leaf sizes, Fire Resistance
Rating (FRR), smoke seals, timber or steel door frame, customized door leaf
facings, leaf edge options, vision panel, vision panel beading options, side
lights, overpanels, ventilation grills and acoustic rating.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(b)
• Hallmark Doors have a durability beyond 15 years
when correctly installed and maintained, based on historic use in-market for
more than 30 years.
• Hallmark Europa Fire Doors, where glazed, contain
glass that has been tested and meets the requirements of BS EN 12600:2002 and
BS EN 1288 Glass in Building. Determination of the bending strength of
glass.
• Hallmark Europa Fire Doors will satisfy the
requirements of NZBC, B2 Durability under conditions of use, and Care of
Product as detailed by Hallmark Group or otherwise specified within contractual
guarantees. - Clause C3 Fire affecting areas beyond the fire source: Performance C3.6, C3.7, C3.9
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Europa Fire Doors comply with NZS 4520 and
are tested to AS 1530.4. Fire doors are supplied with Product Labels/ID
tags which comply with NZS 4520, on which the Fire Resistance Rating (FRR) and
door set numbers are detailed. In accordance with NZS 4520, Hallmark Group
maintains a register of door sets, and issues an installer’s declaration with
each door set.
• Hallmark Europa doors to be fitted with smoke seals
in accordance with NZBC C/AS2 clause 4.16.2 b) and Appendix C C6.1.2.
• If required, glazing to Hallmark Europa Fire Doors
is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision comply with NZS 4520.
• Hallmark Europa Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified and approved hardware for use with
its fire door set products.
• Hallmark Europa Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5. If
door is located on an escape route, a self-closing device to be installed and adjusted
to meet maximum frictional forces requirements of NZBC C/AS2 Appendix C, clause
6.1.3. The selection of hardware to meet these requirements is not the
responsibility of Hallmark Group but Hallmark Group makes available a list of
commonly specified and approved hardware for use with its fire door set
products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause C4 Movement to place of safety: Performance C4.3, C4.4, C4.5
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Europa Fire Doors comply with NZS 4520 and
are tested to AS 1530.4. Fire doors are supplied with Product Labels/ID
tags which comply with NZS 4520, on which the Fire Resistance Rating (FRR) and
door set numbers are detailed. In accordance with NZS 4520, Hallmark Group
maintains a register of door sets, and issues an installer’s declaration with
each door set.
• Hallmark Europa doors to be fitted with smoke seals
in accordance with NZBC C/AS2 clause 4.16.2 b) and Appendix C C6.1.2.
• If required, glazing to Hallmark Europa Fire Doors
is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision comply with NZS 4520.
• Hallmark Europa Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified and approved hardware for use with
its fire door set products.
• Hallmark Europa Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5. If
door is located on an escape route, a self-closing device to be installed and adjusted
to meet maximum frictional forces requirements of NZBC C/AS2 Appendix C, clause
6.1.3. The selection of hardware to meet these requirements is not the
responsibility of Hallmark Group but Hallmark Group makes available a list of
commonly specified and approved hardware for use with its fire door set
products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause C5 Access and safety for fire fighting operations: Performance C5.6, C5.8
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Europa Fire Doors comply with NZS 4520 and
are tested to AS 1530.4. Fire doors are supplied with Product Labels/ID
tags which comply with NZS 4520, on which the Fire Resistance Rating (FRR) and
door set numbers are detailed. In accordance with NZS 4520, Hallmark Group
maintains a register of door sets, and issues an installer’s declaration with
each door set.
• Hallmark Europa doors to be fitted with smoke seals
in accordance with NZBC C/AS2 clause 4.16.2 b) and Appendix C C6.1.2.
• If required, glazing to Hallmark Europa Fire Doors
is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision comply with NZS 4520.
• Hallmark Europa Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified and approved hardware for use with
its fire door set products.
• Hallmark Europa Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5. If
door is located on an escape route, a self-closing device to be installed and adjusted
to meet maximum frictional forces requirements of NZBC C/AS2 Appendix C, clause
6.1.3. The selection of hardware to meet these requirements is not the
responsibility of Hallmark Group but Hallmark Group makes available a list of
commonly specified and approved hardware for use with its fire door set
products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause D1 Access routes: Performance D1.3.1(b), D1.3.1(c), D1.3.4(f)
• Hallmark Europa Fire Doors can be used within as
accessible route where design consideration is given to compliance to NZBC
D1/AS1, paragraph 7.0.
• Doors to be installed with door handles that meet
the requirements of NZBC D1/AS1 clause 7.0.5. The selection of hardware
to meet these requirements is not the responsibility of Hallmark Group but
Hallmark Group makes available a list of commonly specified approved hardware
for use with its fire door set products. - Clause E2 External moisture: Performance E2.3.2, E2.3.7
• Hallmark Europa Fire Doors have not been tested for water ingress in
exterior installations and we make no statement as to its suitability under
NBCC E2 “External Moisture”. All exterior doors should be given as much shelter
as permissible and be fitted with appropriate flashing systems. - Clause F2 Hazardous building materials: Performance F2.3.2, F2.3.3
Hallmark
Doors are manufactured using inert, nontoxic materials
Hallmark
Europa Fire Doors contain no Asbestos, Crystalline Silica or other
inorganic fibers.
If
required, Hallmark Europa Fire Door vision panels, side lights and
overpanels, glazing complies with NZS 4223.3.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
• NZS 4520:2010 Fire resistant doorsets
• AS 1530.4:2005 & 2014 Methods for fire tests on
building materials, components and structures. Part 4: Fire resistance
tests of elements of building construction.
• NZS 4223.3: 2016 Code of practice for glazing in
buildings Part 3: Human impact safety requirements
• BS EN 12600:2002 Glass in Building. Pendulum test.
Impact test method and classification for flat glass.
• BS EN 1288 Glass in Building. Determination of the
bending strength of glass.
Design requirements
Europa Fire Doors are designed for commercial and residential
buildings, and their associated ancillary and outbuildings.
Maximum sizes are stated on the door data sheets.
Door frames, Door leaf facing options,
Design door vision panels, side lights and
overpanels, Ventilation grilles, to be in accordance with options stated on the
selected door data sheets.
All hardware used in conjunction with Europa Fire
Doors to be Hallmark Group approved hardware. The selection of hardware is not
the responsibility of Hallmark Group but Hallmark Group makes available a list
of commonly specified approved hardware for use with its fire door set
products.
For compliance fire signage to be installed in
conjunction with fire doors in accordance with NZBC C/AS2, paragraph 3.16 and
F8/AS1, paragraph 5.2.
Refer to www.hallmarkgroup.co.nz/fire-doors for
data sheets.
Installation requirements
Inspect products prior to installation to ensure they
are free from defects.
Hallmark Fire Doors must be installed in accordance
with Hallmark requirements. Refer to
www.hallmarkgroup.co.nz/fire-door-installation.
Opening to be prepared as per Hallmark Group
Installation relating to correct configuration and wall system.
Appropriate packers and Backfilling required to
ensure compliance, generally maximum 10mm thick.
Fix Jamb as per appropriate requirements, see
appropriate Installation Document
Where doorstops are supplied loose (Timber Jamb
System) do not fit until all perimeter seals and hardware is installed and
operating. Set and fix door stop ensuring the door latches freely.
An installer’s declaration to be completed by the
installer post installation and fitting of hardware and returned as
confirmation of compliance with NZS 4520, prior to Hallmark Group supplying of
Fire/ID tag labels.
Maintenance requirements
Hallmark Fire Doors to be weekly inspected and
maintained to ensure proper functionality.
Ensure closer and lockset correctly adjusted. Ensure
Fire Doors are not held open by any mechanism or object that will prevent the
door from closing or operating in the event of a fire.
All seals, hinges, closers, latch set and other
hardware to be checked annually for proper fit and operation, and to ensure all
screws and fixings remain tight.
Operational clearances should be checked annually to
ensure no impairment to the Fire Door functionality.
Vision panels can be cleaned with a general glass
cleaning solution. No abrasive materials or products should be used as these
will cause damage to glass surfaces.
Fire Door surfaces, jambs, seals etc. should be
regularly cleaned. No abrasive products should be used as these can cause
damage to painted, stained/lacquered or finished surfaces.
Manufacturer
Legal Trading Name:
Hallmark Group
Business Email:
sales@hallmarkgroup.co.nz
Contact Number/s:
03 3134754
0800 486237
Product Identifier
HFE60DAS
Warnings
This product has no warnings associated with it.
 |
Date last validated:
16 June 2025 |
 |
Date last updated:
16 June 2025 |
|