Unex Hampton Framed Balustrade

B1.3.3 - Hampton balustrade adheres with the minimum barrier height in respect to the location and building type (As per Table 3.1 minimum barrier heights). Stair barriers in areas likely to be frequently used by children under six years of age require no gaps larger than 100mm and 150mm in the stair tread. Balustrade geometry shall follow the dimensions illustrated barriers in figure 3.3 (Example of barrier geometries).

B1.3.4 - Hampton balustrade style loading aligns with the barrier loads set out in AS/NZS 1170.1 Clause 3.6 and Table 3.3. The magnitude of the barrier loads that need to be applied in the design depends specifically on the occupancy of that part of the building or structure

B1.3.5 - Hampton balustrade style displacement is recommended to not exceed 30mm under barrier and wind loads as described in B1/VM1.

B1.3.7 - Hampton balustrade style fixings and connections are designed to be suitable for the supporting structure (material and strength), the fixing (type, edge distance and spacing) and to be adequate to resist balustrade loads.

B1.3.8 - Hampton balustrade has a durability requirement of no less than 15 years.

B1.3.9 - Hampton balustrade style has no sharp edges or projections than can cause injury when restraining people. All extrusions have minor radii and any sharp edges are to be removed.

B1.4.3 - Hampton balustrade style uses aluminum that has been designed in accordance with AS/NZS 1170.0:2002 Appendix B. All product is powder coated or anodized to the specifiers standards to ensure the best durability of the product in the installed location.

B2.3 - Hampton balustrade element "Balustrade" must have a durability requirement of no less than 50 years. 

D1.1.7.1 - Hampton balustrade prevents falling from access routes and complies with NZBC F4

D1.2.3.1 - Hampton balustrade lower rail height is adjusted to where the surface of an accessible route is more than 25 mm above the adjacent ground to provide protection from falling.

D1.6.0.6 - Hampton balustrade top rail is used as a handrail is applications where required, the height of the rail is situated between 900mm and 1000mm above the pitch line/FFL.

D1.6.0.9 - Hampton balustrade handrail options come in a range of sizes and provide acceptable profiles for accessible stairways and ramps.

F4.1.1 - Hampton balustrade adheres to the minimum barrier heights (F4/AS1 Table 1) in the respective area installed

F4.1.2.1 - Hampton balustrade aligns with the barrier height and geometry as set out in Table 1, Figure 2, figure 3 and figure 4. The barrier design ensures that, anywhere over the full height of the barrier, a 100 mm diameter sphere cannot pass through. In applications where the barrier is on a staircase or similar application, The triangular opening formed by the riser, tread, and bottom rail of the barrier on a stair shall be of such a size that a 150 mm diameter sphere cannot pass through it.

F4.1.2.2 - In areas used exclusively for emergency or maintenance purposes in buildings, and in other buildings not frequented by children, barriers may have openings with maximum dimensions of either: 300mm horizontally between vertical balustrade members or 460mm vertically between longitudinal rails.

F4.1.2.3 - Hampton style shall adhere to the acceptable methods of the construction of rail barriers in conjunction with parapets so they are not readily available to be used as seats, as required by Clause F4.3.4(h) for buildings other than housing.

F9.2.1 - The Hampton balustrade can be used as a pool barrier when at the minimum height of 1200mm. Hampton has been design to best relate to Figure 1 (b) and (d) balustrade to ensure compliance.

F9.2.4 - Hampton adheres with appendices C, D, E & F which are acceptable methods for assessing the strength of pool barriers.