Resene Armourcote 512 epoxy enamel

Product Description

An epoxy finish that protects concrete and metals against corrosion and chemical degradation. Fully cured film is hard and abrasion resistant.

Typical Uses:

• Concrete surfaces
• Galvanised steel
• General marine use
• Piping, pulp and paper plants
• Repaints
• Structural steel
• Tank exteriors
• Waste/water treatment plants

Performance:

1. High build, abrasion resistant finish
2. Resistant to solvents and a wide range of chemicals including dilute mineral acids.
3. Near white epoxy finish
4. Suitable for use as a tanklining and immersion in fresh and saltwater
5. Ultimate film properties will require two weeks cure time

Limitations:

1. This product will chalk when continuously exposed to sunlight. This chalking in no way impairs performance.
2. Not recommended for constant immersion in acids, alkalis or solvents (consult manufacturer for specific recommendations).
3. Do not apply over thermoplastic coatings
4. Extended cured times are required before immersion service.
5. Cure rates are retarded at temperatures less that 10ºC