Freedom Works GMCPH60 Concrete Paver Tile Hazard / Warning Indicators
300 x 300 x 60mm minimum 50MPA high cement content Tile Hazard Tactile Indicator.

Search Result » Freedom Works GMCPH60 Concrete Paver Tile Hazard / Warning Indicators

Freedom Works GMCPH60 Concrete Paver Tile Hazard / Warning Indicators

300 x 300 x 60mm minimum 50MPA high cement content Tile Hazard Tactile Indicator.

The following information has been provided by Freedom Works demonstrating how this product complies with the Building Product Information Requirements.

Product Description

Base Material:Minimum 50MPA high cement content giving it high compression strength, high density and very durable, low porosity giving high stain resistance

Dimensions:300 x 300 x 60 or 300 x 300 x 40

Finish:Sealed or Unsealed. Sealed pavers have increased slip resistance, brighter, more durable colour(can be resealed to restore colour)

Code Compliance NZTA RTS14—Land Transport New Zealand—Guidelines for facilities for the blind and vision impaired AS/NZS 1428.4.1:2009—Design for access and mobility NZS1421:2001—Design for access and mobility—building and associated facilities All slip resistance tests are done in accordance with AS/NZS4586:2004– average COF #0.88 (sealed)

Installation Must be installed 600mm back from the edge of the hazard to a minimum depth of 600mm across the entire width of the accessible path of travel

Masterspec Code Interior: 6615FG Exterior: 8281FG

Features Installation and customer care instructions available

View detailed information about GMCPH60 product
https://www.freedomworks.co.nz/product/gmcph60-concrete-hazard-paver/

Compliance Statement

Product Class

Scope of Use

GMCPH60 Guidemaster Concrete Paver Hazard Tactile Ground Surface Indicator (TGSI) - A Concrete Paver Hazard / Warning tactile indicator, embedding into mortar and rebated against substrate finish for roading, civil works and foot paths.

Warn the vision impaired of such warnings as:

Life threatening hazards where serious falls may occur, such as at railway platforms, wharves, vehicular driveways and exits from car parks, etc., which intersect or form access paths
To indicate that a point of importance has been reached, such as the location of a bus sign or tram stop or the location of a change of direction on a pedestrian crossing island or as wayfinding to signify the location of a change of direction while traveling
At the top and bottom of stairways and ramps warning of a change in level.
At pedestrian crossings to indicate the path of travel

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Clause D1 Access routes: Performance D1.3.1, D1.3.1(a), D1.3.1(b), D1.3.1(c), D1.3.2, D1.3.2(a), D1.3.2(c), D1.3.3(c), D1.3.3(h), D1.3.3(i), D1.3.3(j), D1.3.3(k), D1.3.3(l), D1.3.3(n), D1.3.4, D1.3.4(a), D1.3.4(g), D1.3.4(h)
The tactiles comply with the building code clause D1 Access Routes which ensure the safety of entry/exit to the building and the safety of any internal or external stairs. It ensures people can move safely into, within and out of buildings.

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:

Code Compliance:

NZTA RTS14—Land Transport New Zealand— Guidelines for facilities for the blind and vision impaired
AS/NZS 1428.4.1:2009—Design for access and mobility, Part 4
NZS4121:2001—Design for access and mobility - building and associated facilities
AS/NZS4586:2004 – Slip resistance classification of new pedestrian surface materials
Land Transport’s Pedestrian Planning and Design Guide
The Royal N.Z. Foundation for the Blind Design Guide Recommendations/Specifications

Product Criteria

Design requirements

Compliant to NZBC acceptable solutions, designed primarily for the exterior environment, designed for accessibility to lead and guide the visually impaired to hazard / warning tactile.

Installation requirements

Embedded into Mortar and rebated against substrate finish. Complete Installation requirements available upon Freedom Strategies Ltd clients request.

Maintenance requirements

Regular Cleaning:

Remove dirt, debris, leaves, and other foreign materials from the tactile indicators regularly using a broom, brush, or a leaf blower.
Periodically wash the surface with water and mild detergent to remove stains and accumulated grime. Avoid using harsh chemicals that could damage the concrete or carborundum.

Regular Maintenance Schedule:

Establish a regular maintenance schedule for concrete paver tactile indicators with carborundum inserts, depending on the level of foot traffic and environmental conditions in the area. More heavily used areas may require more frequent inspections and maintenance.

Complete Maintenance requirements available upon Freedom Strategies Ltd clients request.

Manufacturer

Legal Trading Name:

Freedom Works

Business Email:

sales@freedomworks.co.nz

Company Website:

www.freedomworks.co.nz

Contact Number/s:

09 3201338

Product Identifier

BRAND: GUIDEMASTER PRODUCT CODE: GMCPH60 DIMENSIONS: 300 X 300 X 60MM THICKNESS LUMINANCE TEST: PROVIDES COLOUR CONTRAST. INTEGRATED DISCRETE TACTILES MUST HAVE 30% MINIMUM LUMINANCE CONTRAST TO THAT OF THE SURROUND SUBSTRATE SURFACE AREA. SLIP RESISTANCE RATING: P5 WET AND DRY - SRV VALUE OF 80

Warnings

This product has no warnings associated with it.

Date last validated: 10 April 2024

Date last updated: 10 April 2024

Search | CBI | About | Contact

mobile | full site