Compliance Statement
Scope of Use
- Hallmark Futura Fire Doors are to be used in
conjunction with the correctly specified jamb system supplied by Hallmark
Group. Components are not interchangeable with other supplier materials or
components.
-
Hallmark Futura Fire Doors are not suitable for
unprotected exterior use where they are exposed to natural elements such as
direct sun or rain, except Electrogalvanized steel leaf facings which are
suitable for sheltered and full exterior applications.
-
Hallmark Futura Fire Doors are not suitable for use
in saunas, steam rooms, smoke houses etc.
-
Hallmark Futura Fire Doors are only suitable for use
with wall construction types as listed on individual door data sheets.
-
Hallmark Futura Fire Doors are not suitable where a
fire rating above 60 minutes is required (use Hallmark Europa Fire Doors for
fire doors above 60 minute rating)
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B2 Durability: Performance B2.3.1(b)
• Hallmark Doors have a
durability beyond 15 years when correctly installed and maintained, based on historic
use in-market for more than 30 years.
• Hallmark Futura Fire
Doors, where glazed, contain glass that has been tested and meets the
requirements of BS EN 12600:2002 and BS EN 1288 Glass in Building.
Determination of the bending strength of glass.
•Hallmark Futura Fire Doors will satisfy the requirements of NZBC, B2
Durability under conditions of use, and Care of Product as detailed by Hallmark
Group or otherwise specified within contractual guarantees. - Clause C3 Fire affecting areas beyond the fire source: Performance C3.6, C3.7, C3.9
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Futura Fire Doors comply with NZS 4520 and
are tested to AS 1530.4 & BS 476.22. Fire doors are supplied with
Product Labels/ID tags which comply with NZS 4520, on which the Fire Resistance
Rating (FRR) and door set numbers are detailed. In accordance with NZS 4520,
Hallmark Group maintains a register of door sets, and issues an installer’s
declaration with each door set.
• Hallmark Futura doors are supplied with and to be
fitted with smoke seals in accordance with NZBC C/AS2 clause 4.16.2 b) and
Appendix C C6.1.2.
• Where required, glazing to Hallmark Futura Fire
Doors is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision panels comply with NZS 4520.
• Hallmark Futura Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Hallmark Futura Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5 and NZS
4520. If door is located on an escape route, a self-closing device to be
installed and adjusted to meet maximum frictional forces requirements of NZBC
C/AS2 Appendix C, clause 6.1.3. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause C4 Movement to place of safety: Performance C4.3, C4.4, C4.5
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Futura Fire Doors comply with NZS 4520 and
are tested to AS 1530.4 & BS 476.22. Fire doors are supplied with
Product Labels/ID tags which comply with NZS 4520, on which the Fire Resistance
Rating (FRR) and door set numbers are detailed. In accordance with NZS 4520,
Hallmark Group maintains a register of door sets, and issues an installer’s
declaration with each door set.
• Hallmark Futura doors are supplied with and to be
fitted with smoke seals in accordance with NZBC C/AS2 clause 4.16.2 b) and
Appendix C C6.1.2.
• Where required, glazing to Hallmark Futura Fire
Doors is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision panels comply with NZS 4520.
• Hallmark Futura Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Hallmark Futura Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5 and NZS
4520. If door is located on an escape route, a self-closing device to be
installed and adjusted to meet maximum frictional forces requirements of NZBC
C/AS2 Appendix C, clause 6.1.3. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause C5 Access and safety for fire fighting operations: Performance C5.6, C5.8
• In accordance with NZBC C/AS2 clause 4.16 and
Appendix C clause C6.1.1, Hallmark Futura Fire Doors comply with NZS 4520 and
are tested to AS 1530.4 & BS 476.22. Fire doors are supplied with
Product Labels/ID tags which comply with NZS 4520, on which the Fire Resistance
Rating (FRR) and door set numbers are detailed. In accordance with NZS 4520,
Hallmark Group maintains a register of door sets, and issues an installer’s
declaration with each door set.
• Hallmark Futura doors are supplied with and to be
fitted with smoke seals in accordance with NZBC C/AS2 clause 4.16.2 b) and
Appendix C C6.1.2.
• Where required, glazing to Hallmark Futura Fire
Doors is in accordance with NZBC C/AS2 paragraph 4.2, uninsulated and insulated
vision panels comply with NZS 4520.
• Hallmark Futura Fire Doors are to be self-latching,
in accordance with NZS 4520. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Hallmark Futura Fire Doors are to be self-closing
in accordance with NZBC C/AS2 Appendix C, clause C6.1.4 and C6.1.5 and NZS
4520. If door is located on an escape route, a self-closing device to be
installed and adjusted to meet maximum frictional forces requirements of NZBC
C/AS2 Appendix C, clause 6.1.3. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products.
• Doors subdividing escape routes, to be designed in
accordance with NZBC C/AS2 clause 3.15, including door closers and latching,
locking devices, direction of opening, degree of opening, vision panels, hold
open devices, delayed action unlocking devices and panic fastenings. The
selection of hardware to meet these requirements is not the responsibility of
Hallmark Group but Hallmark Group makes available a list of commonly specified
approved hardware for use with its fire door set products. - Clause D1 Access routes: Performance D1.3.1(b), D1.3.1(c), D1.3.4(f)
• Hallmark Futura Fire Doors can be used within as accessible route where
design consideration is given to compliance to NZBC D1/AS1, paragraph 7.0.
• Doors to be installed with door handles that meet the requirements of
NZBC D1/AS1 clause 7.0.5. The selection of hardware to meet these
requirements is not the responsibility of Hallmark Group but Hallmark Group
makes available a list of commonly specified approved hardware for use with its
fire door set products. - Clause E2 External moisture: Performance E2.3.2, E2.3.7
• Hallmark Futura Fire Doors have not been tested for water ingress in
exterior installations and we make no statement as to its suitability under
NBCC E2 “External Moisture”. All exterior doors should be given as much shelter
as permissible and be fitted with appropriate flashing systems. - Clause F2 Hazardous building materials: Performance F2.3.2, F2.3.3
-
Hallmark
Doors are manufactured using inert, nontoxic materials
- Hallmark
Futura Fire Doors contain no Asbestos, Crystalline Silica or other
inorganic fibers.
- If
required, Hallmark Futura Fire Door vision panels, side lights and
overpanels, glazing complies with NZS 4223.3.
- Clause H1 Energy efficiency : Performance H1.3.1, H1.3.2E, H1.3.3
-
R-Value
or Thermal Insulation Rating of Hallmark Futura Fire Doors:
- FD30 System: 0.50Km²/W
- FD60 System: 0.59Km²/W
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
• NZS 4520:2010
Fire resistant doorsets
• AS1530.4:2005
Methods for fire tests on building materials, components and structures. Part 4: Fire resistance tests of elements of
building construction.
• BS 476 Pt.22:
Fire Tests on Building Materials and Structures, Method for determination of
fire resistance of non-loadbearing elements of construction
• BS EN 1634-1 Fire
resistance and smoke control tests for door and shutter assemblies, openable
windows and elements of building hardware. Fire resistance test for doors and
shutter assemblies and openable windows
• NZS4223.3: 2016
Code of practice for glazing in buildings Part 3: Human impact safety
requirements
• BS EN 12600:2002
Glass in Building. Pendulum test. Impact test method and classification for
flat glass.
• BS EN 1288 Glass in Building.
Determination of the bending strength of glass.
Design requirements
-
Futura
Fire Doors are designed for commercial and residential buildings &
ancillary outbuildings. Maximum door sizes & leaf thicknesses are
stated on the data sheets.
- Door
jamb/frames, leaf facing options & leaf edge options, vision panels,
side lights & overpanel configuration, dimensions, glass type and
glazing bead type to be in accordance with data sheets. Ventilation
grilles to be IFD (Kilargo) or LVH (Lorient) intumescent grilles, in
accordance data sheets (not suitable for exterior doors or smoke control
door sets).
- All
door hardware used with Futura Fire Doors to be Hallmark approved. The
selection of hardware is not the responsibility of Hallmark Group but
Hallmark makes available a list of approved hardware for use with its fire
door set products.
- For
compliance fire signage to be installed in conjunction with fire doors in
accordance with NZBC C/AS2, paragraph 3.16 and F8/AS1, paragraph 5.2.
Refer to www.hallmarkgroup.co.nz/fire-doors for data sheets.
Installation requirements
Inspect
products prior to installation to ensure they are free from defects.
Hallmark
Fire Doors must be installed in accordance with Hallmark
requirements. Refer to
www.hallmarkgroup.co.nz/fire-door-installation.
Opening
to be prepared as per Hallmark Group Installation relating to correct
configuration and wall system.
Appropriate
packers and Backfilling required to ensure compliance, generally maximum
10mm think. Fix Jamb as per appropriate requirements. See website.
Where
doorstops are supplied loose do not fit until all perimeter seals and
hardware is installed and operating. Set and fix door stop ensuring the
door latches freely.
Hallmark
Group issues an installer’s declaration with each door set. The
installer’s declaration is to be completed by the installer post
installation and fitting of hardware, and returned as confirmation of
compliance with NZS 4520, prior to Hallmark Group supplying of Fire/ID tag
labels.
Maintenance requirements
Hallmark Fire Doors to be weekly inspected and
maintained to ensure proper functionality.
Ensure closer and lockset correctly adjusted. Ensure
Fire Doors are not held open by any mechanism or object that will prevent the
door from closing or operating in the event of a fire.
All seals, hinges, closers, latch set and other
hardware to be checked annually for proper fit and operation, and to ensure all
screws and fixings remain tight.
Operational clearances should be checked annually to
ensure no impairment to the Fire Door functionality.
Vision panels can be cleaned with a general glass
cleaning solution. No abrasive materials or products should be used as these
will cause damage to glass surfaces.
Fire Door surfaces, jambs, seals etc. should be
regularly cleaned. No abrasive products should be used as these can cause
damage to painted, stained/lacquered or finished surfaces.
Manufacturer
Legal Trading Name:
Hallmark Group
Business Email:
sales@hallmarkgroup.co.nz
Contact Number/s:
03 3134754
0800 486237
Product Identifier
HFF30HD
Warnings
This product has no warnings associated with it.
 |
Date last validated:
16 June 2025 |
 |
Date last updated:
16 June 2025 |
|