Compliance Statement
Scope of Use
Magna Glulam is for use:
• In all locations subject to specific engineering design or selected from the Magna engineered span
tables
• Fixing materials are to be in accordance with NZS 3604:2011, section 4.0
• In all buildings where the relevant part of the building complies with the NZBC, or in existing
buildings, where the designer/engineer is satisfied that the existing building is suitable or the
intended purpose
• Fabricated connections to be in accordance with AS/NZS 1170.2:201
• Where specific fire performance is required, the beams must be specified in conjunction with a Fire
Engineer
• The specification and installation of Magna laminated beams must be carried out by (or supervised
by) a Licensed Building Practitioner (LBP) with a relevant license class and with access to all relevant
technical documentation.
• The beams must be stored, handled, maintained and installed in accordance with all Magna
requirements
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2
B1 Structure - Engineering Span tables to AS/NZS 1170:2002, Manufactured to AS/NZS 1328:1998 and AS/NZS
8008:2022. - Clause B2 Durability: Performance B2.3.2(a)
B2 Durability - Independent assessment, Class 2 timber species, Scion (8 Sep 2021) a) In-service history b)
Laboratory testing c) Comparable performance of similar building element - Clause C6 Structural stability: Performance C6.2(a), C6.3
C6 Structural Stability - AS/NZS 1720.1:2010 Specification to NZS 3603:1993, section 9. Design of Fire
Resistance. Including revised version AS/NZS 1720.1-2010.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Magna Glulam is third party certified by the GLTAA (Glue Laminated Timber Association of Australia) to the
relevant AS/NZ standards.
AS/NZS 1328:1998 (Part 1&2) – Glued Laminated Structural Timber
AS/NZS 8008:2022. Timber – Finger Joisted Structural timber – product and Performance Requirements
AS/NZS 1720.1-2010 – Timber structures Design Methods
Design requirements
• Apply effective building design and detailing practices to prevent water retention and accumulation in timber joints, including the use of suitable end caps and ventilation.
• Specify high-quality protective finishes and adhere to the recommendations provided by coating manufacturers regarding their usage.
• Incorporate an inspection and maintenance program based on exposure levels and the specifications provided by coating manufacturers.
• Give special attention to surfaces directly exposed to sunlight and recommend owners conduct more frequent inspections and maintenance.
Installation requirements
• Ensure that the timber remains dry and in good condition by following the on-site handling and protection guidelines.
• Apply an appropriate coating to seal any newly exposed surfaces resulting from cuts, notches, drill holes, and joints.
• Promptly address any damage to the coating or stain protection.
• Select fasteners/fixings with a durability that matches the design life of the chosen Magna Glulam timber product, taking into account the building’s location relative to the specified zones. i.e. coastal and hazard zones.
Maintenance requirements
• Adhere to Magna Glulam’s inspection and maintenance program, incorporate the guidance of the designer, builder, and surface coat manufacturer.
• Perform maintenance inspections at least once a year, or more frequently for areas directly exposed to weather, with special attention to joints, fasteners, end grain capping, beam lamination points, and other horizontal surfaces that tend to accumulate water. Good Design and Detailing
Manufacturer
Legal Trading Name:
ETH Enterprise PTE LTD.
Contact Number/s:
+64 09 6222050
0800458623
Importer
Legal Trading Name:
The Lumberbank NZ Ltd
Business Email:
info@lumberbank.co.nz
Contact Number/s:
09 6222050
Product Identifier
MAGNA GL17 BEAMS (INCLUDING RAFTERS AND LINTELS) ARE AVAILABLE IN THE BELOW SIZES:
90 X 90 MM 17 3.6, 4.8,5.4 & 6.0M
115 X 115 MM 17 3.6, 4.8,5.4 & 6.0M
240 X 85MM 4.8, 5.4, 6.0, 7.2M
260 X 85MM 4.8, 5.4, 6.0M
300 X 85MM 4.8, 5.4, 6.0, 7.2M
Warnings
This product has no warnings associated with it.
 |
Date last validated:
12 November 2024 |
 |
Date last updated:
12 November 2024 |
|