FIRESTOP HK-100
Intumescent Insert for firestopping services through fire-rated walls and ceilings

Search Result » FIRESTOP HK-100

FIRESTOP HK-100

Intumescent Insert for firestopping services through fire-rated walls and ceilings

The following information has been provided by FIRESTOP demonstrating how this product complies with the Building Product Information Requirements.

Product Description

FIRESTOP HK-100 is a fire-rated intumescent insert designed for electric cable and PEX pipe penetrations through fire-rated plasterboard walls and ceilings.

Available two sizes, HK-100/14 and HK-100/20, it provides a neat, flush finish while allowing cables to be added, removed or repositioned after installation.

Key Features

Fire tested in New Zealand at an accredited independent laboratory

Allows future cable changes without removing the insert

Tested with FIRESTOP Ultra sealant

Quick and easy installation

Flush finish ideal for light fittings, card readers and similar applications

ApplicationsSingle cables and cable bundles up to 20 mm diameter

Tested with TPS, Fire Alarm and CAT6 cables16 mm PEX pipe (wall penetrations only)

Learn More
https://www.firestopcentre.co.nz/fire-stop-products/firestop-fire-protection-products/INSERTS/firestop-HK-100/

Compliance Statement

Product Class

Scope of Use

FIRESTOP HK-100 is a fire-rated intumescent insert designed for firestopping electric cable penetrations through fire-rated plasterboard walls and ceilings, as well as 16 mm PEX pipe penetrations through fire-rated plasterboard walls. Available in HK-100/14 and HK-100/20, the insert provides a neat, flush finish and allows cables to be added, removed or repositioned after installation. FIRESTOP HK-100 has been fire tested in New Zealand at an accredited laboratory in accordance with AS 1530.4:2014 and AS 4072.1:2005, in conjunction with FIRESTOP Ultra sealant. It is suitable for single cables and cable bundles up to 20 mm in diameter, including tested TPS, Fire Alarm and CAT6 cables.

New Zealand Building Code (NZBC)

The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:

Clause C3 Fire affecting areas beyond the fire source: Performance C3.9
FIRESTOP HK-100 Inserts have been tested to AS1530.4:2014 and AS4702.1:2005.

Notes

FIRESTOP HK-100 Inserts have been tested to AS1530.4:2014 and AS4702.1:2005.

Evidence

The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:

FIRESTOP HK-100 Inserts have been tested to AS 1530.4:2014 and AS 4072.1:2005, providing fire resistance ratings (FRR) when applied to fire-rated substrates in accordance with the relevant tested system, tech drawings and product information.

Please refer to below links:

FIRESTOP HK-100 product page

FIRESTOP HK-100 BPIR Sheet

Product Criteria

Design requirements

FIRESTOP HK-100 Inserts are suitable for electric cables and cable bundles up to 20 mm in diameter, and 16 mm PEX pipe (wall penetrations only), through fire-rated plasterboard walls and ceilings. The specified application, substrate, service type and required Fire Resistance Rating (FRR) must be in accordance with the relevant tested system to AS 1530.4:2014 and AS 4072.1:2005.

Installation requirements

Refer to firestopcentre.co.nz for FC tech drawings, product information, and test reports relating to specific application, design, and installation instructions. Products must not be modified in any way that may compromise performance. All fire-rated service penetrations must be labelled in accordance with AS 4072.1:2005. FIRESTOP products should be stored in a clean, dry location and kept in their original packaging prior to installation.

Maintenance requirements

FIRESTOP products have no specific maintenance requirements. Damaged products should be repaired or replaced to maintain the required FRR of the fire-rated system.