Compliance Statement
Scope of Use
DesignerSplash is intended for use as an internal lining under the following conditions
- It should be installed on a vertical substrate that is soundly fixed, level, clean, free of dust, and able to support the adhered DesignerSplash.
- It is suitable for use in buildings where material Group Number 1 or greater is permitted.
- The installation must be in accordance with the DesignerSplash installation guide.
- When installed in close proximity to an electrical installation, and there is a potential risk of touch voltage (e.g. an unearthed power point), protective earthing should be provided.
- If installed as a kitchen splashback, DesignerSplash panels must have a minimum 20mm setback from the rear edge of all hobs (incl. electric, induction, and gas). For all gas cooktops, a clearance of 110 mm from the edge of the open-flame gas burner is required.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause B1 Structure: Performance B1.3.1, B1.3.2, B1.3.3, B1.3.3(a), B1.3.3(j), B1.3.3(q), B1.3.4, B1.3.4(a), B1.3.4(b), B1.3.4(c), B1.3.4(d), B1.3.4(e)
Datasheet supplied by manufacturer. - Clause B2 Durability: Performance B2.3.1(b)
Datasheet supplied by manufacturer. PVDF coating. - Clause C2 Prevention of Fire occurring: Performance C2.2
Tested to AS/NZS 5263.1.1:2020 by IAMPO R&T Oceania [Report # GTL-21050310-R02, 25/11/2022]. - Clause C3 Fire affecting areas beyond the fire source: Performance C3.4, C3.4(a)
Classified by SGS testing laboratory as B-s1, d0 in accordance with EN 13501-1, equivalent to Material Group 1 [Report # GZMR120509331, 30/05/2014]. - Clause E3 Internal moisture: Performance E3.3.4, E3.3.5, E3.3.6
Aluminium is impervious to moisture. - Clause F2 Hazardous building materials: Performance F2.3.1
PVDF is inert.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
When used in building work, DesignerSplash and the aluminum finishing trims will contribute to building work through compliance with building code obligations that apply to the product and its installation.
Design requirements
DesignerSplash is an aluminium composite panel intended for internal use where an impervious lining is required.
DesignerSplash comprises 0.5mm aluminium skins with a high-density mineral fibre core (3mm). The panels are supplied in a variety of sizes and colours.
DesignerSplash comes with PSP aluminium finishing trims.
When installed, it will contribute to compliance with E3 (internal moisture) of the building.
The panels are fixed to the substrate with an MS polymer-based adhesive in conjunction with the finish trims. Suitable substrates include plasterboard, timber substrates, tiles, HPL linings, PVC linings, and masonry.
The system must be designed, specified, installed, and maintained with all of PSP Limited requirements.
For all design, installation, and maintenance-related information and for information supporting PSP Limited claims, refer to www.psp.co.nz.
Installation requirements
Scope of Use
DesignerSplash is intended for use as an internal lining under the following conditions
- It should be installed on a vertical substrate that is soundly fixed, level, clean, free of dust, and able to support the adhered DesignerSplash.
- It is suitable for use in buildings where material Group Number 1 or greater is permitted.
- The installation must be in accordance with the DesignerSplash installation guide.
- When installed in close proximity to an electrical installation, and there is a potential risk of touch voltage (e.g. an unearthed power point), protective earthing should be provided.
- If installed as a kitchen splashback, DesignerSplash panels must have a minimum 20mm setback from the rear edge of all hobs (incl. electric, induction, and gas). For all gas cooktops, a clearance of 110 mm from the edge of the open-flame gas burner is required.
Maintenance requirements
The system must be designed, specified, installed, and maintained with all of PSP Limited requirements.
For all design, installation, and maintenance-related information and for information supporting PSP Limited claims, refer to www.psp.co.nz.
Product Identifier
CLASS 1
Warnings
This product has no warnings associated with it.
 |
Date last validated:
23 October 2024 |
 |
Date last updated:
23 October 2024 |
|