Technical Statement
Product Description
Scope of use
The Allproof Vision Shower Channel has been designed to provide an aesthetic look for tiled floor showers utilising a waterproof membrane layer below the finished tile surface. This membrane is dressed onto the Allproof specially designed VF80 flange allowing for subsurface moisture to be drained.
The channel can be used against a wall with a fall created towards the channel and/or a level threshold channel on entrance to a walk-in shower.
The channel can be customised to specific lengths and extra outlets included for areas requiring higher drainage capacity.
New Zealand Building Code (NZBC)
The product will, if employed in accordance with the supplier's installation and maintenance requirements, assist with meeting the following provisions of the building code:
- Clause G13 Foul water: Performance G13.3.1, G13.3.1(a), G13.3.1(b), G13.3.1(c), G13.3.1(d), G13.3.2, G13.3.2(a), G13.3.2(b), G13.3.2(c), G13.3.2(d), G13.3.2(e), G13.3.2(f)
NZBC G13/AS1 Foul water clause 1(b), 3.1(c) & (d) and clause 3.4 Floor Outlets: Allproof floor waste systems (water traps and grates) have been designed and manufactured to be compliant to all requirements set out in G13/AS1.
- The water seal in the gully prevents foul air and gases entering buildings,
- Grates are removable to access the system for maintenance and cleaning,
- Grates finish flush with the floor,
- Outlets exceed the minimum diameter.
Refer to install guides and specifications for further information.
NZBC G13/AS3 Foul water and AS/NZS 3500.2 clauses 4.6: Allproof floor waste systems have been designed to comply with all criteria outlined in AS/NZS 3500.2 and modifications covered in NZBCG13/AS3. Outlet connections designed to specifications in Appendix A of 3500.2. Gullies designed in accordance with requirements in clause 4.6.
Evidence
The product meets the requirements set out in the following documents, or relevant parts of cited standards within the documents:
Refer to internal documentation from Allproof Industries Ltd available on request.
Or available on the website.
Supporting evidence
The product has and can make available the following additional evidence to support the above statements:
Use in Service History
Installed in multiple high profile situations including government buildings, residential and commercial facilities.
- Intercontinental Hotel Auckland
- Hobson Street Hotel
- Wynyard Central Apartments
Product Criteria
Design requirements
The Allproof Vision Series is constructed from high grade stainless steel in New Zealand. We have off the shelf sizes available in 800, 900, 1000 and 1200mm all coming with an Allproof floor waste gully system and VF80 flange.
Allproof also customise channels catering for varied lengths with multiple and/or offset outlet positions catering to specific project requirements.
The Vision series can be further customised with powder coated clours or electroplated metal collection finishes to create continuity and consistency with other fittings within the bathroom design.
Installation requirements
The system utilises a specially designed VF80
flange that is recessed flush into the base of a channel created on site, the
waterproofing membrane is then dressed into the recess and onto the flange
completely tanking the wet area. The flange has been designed to provide a high
quality surface for bonding the waterproof membrane to and ensures that all
subsurface moisture collected by the waterproof membrane is directed into the
outlet. The stainless steel channel is set into the recess, levelled and secured
using a porous compound before being tiled up against with a bead of silicon
applied between the tile and channel edge.
Maintenance requirements
The grate has been designed to be easily removable for access to the outlet for any maintenance requirements and cleaning of the channel.
Please see Allproof Stainless Steel maintenance guide for the cleaning and treatment of the product, please note this is for aesthetic purposes and does not effect the performance of the system.
https://www.allproof.co.nz/maintenance
Warrantees
Please see allproof.co.nz for individual component warranty information.
https://www.allproof.co.nz/pdf/Legal-files/Allproof%20Product%20Warranty%200919v2.pdf
Relationships
 |
New Zealand Made |
Building Product Information Requirements
Manufacturer
Legal Trading Name:
Allproof Industries
Business Email:
sales@allproof.co.nz
Contact Number/s:
9 4818020
Product Identifier
VISION VK V800 V900 V1000 V1200
Warnings
This product has no warnings associated with it.
 |
Date last validated:
21 November 2024 |
 |
Date last updated:
21 November 2024 |