Application Commercial
Description
The 4031 Series is a non-handed, surface mounted closer. The choice of three mountings, installation accessories and ease of installation offers a versatile solution to door control in moderate traffic applications.
The 4031 Series has been designed to be used on aluminium, hollow metal or timber swinging commercial interior/exterior doors and is ideally suited for apartment entrance, office, storeroom or toilet doors.
Warranty
Mechanical - 30 years
Finish - Refer to allegion.co.nz/finisheswarranty
Door type Timber or metal
Door size External door 660mm - 914mm, internal door 660mm - 1219mm
Applications Regular - pull side mount, parallel arm - push side mount, top jamb - push side mount
Adjustment controls Closing speed, latching speed, backcheck
Strength 1-4 adjustable
Options Hold open arm, adaptor plate, parallel-arm drop plate, square metal cover
SRI For installations where a higher level of protection against weather conditions, or the effects of a potentially corrosive atmosphere is required, LCN offers a special rust inhibiting (SRI) process. Ferrous metal components receive an SRI pretreatment and a standard powder coat finish of your choice, or a custom powder coat finish for a nominal additional cost. Closers treated with the SRI process exceed the 100 hour protection level available with standard LCN powder coated finishes.
© Allegion plc, 2022 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland
REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 527370
Allegion is an equal opportunity and affirmative action employer