Cabot's Floor Clean

Get those timber floors looking their sparkling best with this handy all-purpose floor cleaner. It’s special formulation has been designed to act as a fast-acting cleaner, cutting through grease and grime. Ideal for use before preparing timber for a coat, or for rejuvenating and prolonging the life of your timber floor coatings.

  • Water Wash Up
Cabot's Floor Clean
  • Areas
    Cork, MDF interior flooring., Parquetry, Solid timber
  • Clean Up
    Water
  • Sizes
    1L
  • Coverage
    60 M2/L
  • Safety Data Sheet
    Download document
Preparation Cabot's Floor Clean should not be used on fresh coatings that are less than 72 hours old. Ensure the surface has been cleaned with a duster or dust mop prior to using Cabot's Floor Clean to ensure loose particles of dirt are removed.
Apply with Floor mop
Application

1. Add approximately 50mls of Cabot's Floor Clean concentrate to 4 litres of water.

2. Apply Cabot's Floor Clean to the floor with a mop to loosen grime and dirt. Do not flood the floor with cleaning solutions. Return excess solution to a bucket and allow the floor to dry.

NOTE: Floor may be slippery while wet. For Extra Dirty Floors Increase the amount of Cabot's Floor Clean concentrate to 100ml to 4L of water.

For Black Heel Marks Use Cabot's Floor Clean direct from bottle onto a rag and rub gently (rubber gloves should be worn).

NOTE: Cabot's Floor Clean will not remove coatings.
N/A

How to Refresh Your Interior Timber Floors

Available sizes

1 LITRE

Product Calculator

If you are unsure on how much product you need, please use our product calculator. Please note minimum length/width value is 1 metre and maximum is 50 metres.

1metre
1metre
Calculate
0 Total SQM
  • 0 SQM
  • 0 Litre

Related Products

Cabot's CFP Floor Water Based Cabot's CFP Floor Water Based

Cabot's CFP Floor Water Based is a clear flooring polyurethane suitable for all interior timber parquetry and cork flooring. Highly durable, it’s been formulated to be hard wearing and has a fast drying finish. No sanding is required on pre-coated timber, saving you a time and hassle.
Cabot's CFP Floor Oil Based Cabot's CFP Floor Oil Based

Highly durable and with a hard-wearing finish, this oil based clear polyurethane has been designed specifically for timber, parquetry, cork and MDF flooring. Formulated to enhance the natural grain and colour of your timber floor, it’s perfect for those high traffic areas or parts of your floor prone to scuffing. Sanding is required.
Cabot's Floor Polish Cabot's Floor Polish

Restore, enhance and protect your timber & wood flooring with Cabot's Floor Polish. Prolong the life of timber coatings - designed for timber, parquetry and cork floors.

This website uses cookies to provide you with a better user experience. If you agree to our use of cookies, please accept this message and continue to use this site.