Features
✔ High elastic strength wood flooring adhesive
✔ Elastic sound reduction: 43dB per VIPAC test
✔ Moisture barrier – Adhesive is waterproof when cured
✔ Allows normal dimensional changes
General Features
✔ LEED qualified contains no isocyanates
✔ Contains no water
✔ Contains no solvents
✔ Contains no VOC
✔ Certified “green”
✔ Certified EC1 PLUS Compliant “very low emission”
✔ Certified DIN EN Compliant (EC Normative: Requisites for wood flooring adhesives)
✔ Non-flammable
✔ High solids content
✔ Ozone friendly
✔ Moisture, sound barrier & stabilizer in one step process
✔ Freeze/thaw stable
✔ Bridges cracks
✔ Suitable for radiant heat systems without primer
✔ Resistant against ageing remains
✔ Suitable for all species according to the UNI EN 13556
✔ Engineered Timber Flooring
✔ T&G Hardwood Strip Flooring
✔ Parquet Hardwood Flooring (2 or 3 layers)
Installation Features
✔ Wet lay – no flash time required
✔ Strong green grab
✔ Non-slump formula
✔ Bridges normal sub floor variations
✔ Eliminates hollow spots
✔ Very low odour
✔ No dimensional changes in timber flooring
✔ Long open time
✔ Spreads easily
✔ For best results it is recommended to use a 6mm notch trowel
Approved Sub Floors
✔ Concrete slabs
✔ Chipboard on cement screed
✔ Fast setting & anhydrite screeds
✔ Ceramic, stone, marble tiles/slabs
✔ OSB (underlayment grade)
✔ Plywood (underlayment grade
✔ Cured levelling compounds
✔ Radiant heated sub floors