Search Results

Products
Documents
All
Categories
Events
Knowledge Base
News
Projects
Stories

SikaWrap® FX-50 C

Carbon fibre string for structural strengthening and connection, and anchoring of SikaWrap® strengthening systems

Carbon fibre, corrosion resistant, durable
Multifunctional use
Easy to install

SikaWrap® Hex-100 G

Glass fiber fabric for structural strengthening

Approved by ICC ESR-3288
Used for shear, confinement or flexural strengthening
Flexible, can be wrapped around complex shapes
Light weight
Non-corrosive
Acid resistant
Low aesthetic impact

Sikadur® Hex-300

High-modulus, high-strength, impregnating resin

Long pot life
Long open time
Easy to mix
Tolerant of moisture before, during and after cure
High strength, high modulus adhesive
Excellent adhesion to concrete, masonry metals, wood and most structural materials
Fully compatible and developed specifically for the SikaWrap® System
High temperature resistance
High abrasion and shock resistance
Solvent-free, VOC compliant

Sika® FerroGard®-300 DuoCrete

Activating Mortar for Hybrid Galvanic System

Specially formulated for application.
Pre-mixed for ease of use.
Single component.
Simple installation.
Long shelf life.
Eliminates inconsistency associated with on-site mixing of mortars.
Minimal site labour requirement reduces costs.
Absence of site batching minimises waste.
Cost effective corrosion control solution.

Sikadur®-31+

2-part Low VOC Epoxy Adhesive for Structural Bonding and Concrete Repair

Easy to mix and apply
Very low VOC (GEV Emicode EC1^PLUS)
Very good adhesion to most construction materials
High initial and ultimate mechanical strength
Suitable for structural concrete repair, class R4
Good adhesion to dry and mat damp concrete
Thixotropic: non-sag in vertical and overhead applications
No primer needed
Good abrasion and chemical resistance
Different coloured components (for mixing control)
Impermeable to most liquids and water vapour
Hardens without shrinkage
Application up to 30 mm thickness in one layer
Temperature application range +10 °C to +30 °C

Sikadur®-30

Thixotropic epoxy adhesive for bonding reinforcement

Sikadur®-30 has the following advantages:

Easy to mix and apply.
No primer needed.
High creep resistance under permanent load.
Very good adhesion to concrete, masonry, stonework, steel, cast iron, aluminium, timber and Sika® CarboDur® Plates.
Hardening is not affected by high humidity.
High strength adhesive.
Thixotropic: non-sag in vertical and overhead applications.
Hardens without shrinkage.
Different coloured components (for mixing control).
High initial and ultimate mechanical resistance.
High abrasion and shock resistance.
Impermeable to liquids and water vapour.

Sikadur®-51

Epoxy flexible resin for sealing joints

Prevents deterioration of joint edges
Excellent adhesive properties
Complies with ACI-302.1R (4.10-Materials for sealing joints)
It can be used on slopes of up to 15°
Absorbs shock, is durable and resists heavy traffic and forklift tires
It can be used as a safety sealant (non-pick)

Sikadur®-61

Flexible Epoxy-PU hybrid adhesive & sealant

Elastic with very good mechanical strength
Easy to mix and apply
Very good adhesion to concrete, steel and masonry
Good adhesion to many other construction materials
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer required

Sikadur®-32 Normal

2-component structural epoxy bonding agent

Sikadur®-32 Normal has the following advantages:

Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High bond strength
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Impermeable to liquids and water vapour
Good chemical resistance

Sikadur®-32+

2-part structural epoxy adhesive for bonding, fixing and anchoring with sustainable benefits

Application temperature range +10 °C to +30 °C
Suitable for dry and damp concrete substrates
Easy to mix and apply
Very good adhesion to a range of construction materials
Hardens without shrinkage
Different coloured parts (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Impermeable to liquids and water vapour
Good chemical resistance

Sikadur® UA

Non slump epoxy resin repair mortar/putty

Easy to mix and apply using either trowel, spatula or gloved hand.
Suitable for application to both dry and damp surfaces.
Adheres well to wet or submerged concrete or steel.
Can be applied underwater.
Excellent non-sag properties for vertical and overhead work.
Does not shrink when hardened.
High abrasion resistance.
Excellent adhesion to concrete, steel, timber and many other substrates.
Both components have different colours to ensure thorough mixing.

Sikadur®-52 Normal

Low viscosity epoxy resin

Shrink free
Insensitive to moisture during application, cure or whilst in service
Applicable over wide temperature range
Low viscosity
Excellent adhesion to most building materials even when damp
High tensile and flexural strength
Supplied in factory proportioned units
High early strength
Chemical resistant

Sikadur®-41 CF Normal

3-component thixotropic epoxy patching mortar

Sikadur®-41 CF Normal has the following advantages:

Easy to mix and apply
Very good adhesion to most construction materials
High strength
Thixotropic: Non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Good abrasion resistance
Good chemical resistance

Sikadur-Combiflex® SG System

High performance joint sealing system

Versatile system suitable for many difficult situations
Highly flexible - high crack and joint bridging ability
Advanced adhesion, no activation on site required
Good chemical resistance
Easy and simple to install
Suitable for dry and damp concrete substrates
Good resistance to ageing
Resistant to UV exposure
Resistant to root penetration
Performs well within a wide range of temperatures
Plasticiser-free
Hot air weldable
Can be used in contact with potable/drinking water

Sikadur®-42 (au)

High strength pourable epoxy resin grout

Insensitive to moisture during application, cure or whilst in service
Applicable at low temperatures down to 5°C.
High early strength
Excellent adhesion to a wide variety of dry and damp substrates such as concrete, stone, fibrous cement, synthetic resins, wood and most metals.
High tensile and flexural strength, vibration resistant.
Supplied in factory proportioned units
Easy to use
Unaffected by wide range of chemicals
Good flow characteristics even in thin layers
Proven track record

Sikadur® Injectokit LV

Low viscosity epoxy crack injection resin

Convenient to use, disposable single cartridge contains both resin and hardener.
Safe and clean to use, non return valves avoid leakage and spills.
High strength, excellent bond to concrete, brickwork and masonry, either wet or dry.
Modular nature, effective and economical use even for the smallest repair.

Sikadur® Injectokit TH

Thixotropic epoxy crack injection resin

Convenient to use, disposable single cartridge contains both resin and hardener.
Thixotropic, can be injected into cracks where access to all sides for sealing is not available.
High strength, excellent bond to concrete, brickwork and masonry, either wet or dry.
Modular nature, effective and economical use even for the smallest repair.

Sikadur®-52 Injection Normal

Epoxy low viscosity injection resin - normal pot life

Injection temperature range +5 °C to +30 °C
Good adhesion to concrete, masonry, stone, steel and wood substrates
Suitable for both, dry and damp conditions
Maximum crack width 5,0 mm
Good mechanical properties
Two grades for different climatic conditions
High mechanical and adhesive strengths
Hard but not brittle
Low viscosity
Injectable with single component pumps

Sikadur®-31 CF Normal

2-component thixotropic epoxy adhesive

Sikadur®-31 CF Normal has the following advantages:

Easy to mix and apply
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag in vertical and overhead applications
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate mechanical strength
Good abrasion resistance
Impermeable to liquids and water vapour
Good chemical resistance

Sika® CarboDur® S

Pultruded Carbon Fibre Plates for Structural Strengthening as Part of the Sika® CarboDur® System

Non-corroding
Very high strength
Excellent durability and fatigue resistance
Unlimited lengths, no joints required
Low system thickness, simple execution of plate intersections or crossings
Easy transportation (rolls)
Lightweight, very easy to install, especially overhead (without temporary support)
Minimum preparation of plate, applicable in several layers
Smooth edges without exposed fibres as result of production by pultrusion
Extensive Testing and Approvals available from many countries worldwide

Reset

Sikadur Hex-300 Part A

Material Safety Data Sheet (MSDS) PDF - 308 KB (en)

Sikadur Hex-300 Part B

Material Safety Data Sheet (MSDS) PDF - 213 KB (en)

SikaWrap®-600 C

Product Data Sheet (PDS) PDF - 486 KB (en)

SikaWrap®-600 C WV

Product Data Sheet (PDS) PDF - 487 KB (en)

SikaWrap® FX-50 C

Product Data Sheet (PDS) PDF - 405 KB (en)

SikaWrap® Hex-100 G

Product Data Sheet (PDS) PDF - 492 KB (en)

SikaWrap®-930 G

Product Data Sheet (PDS) PDF - 1 MB (en)

Sika® CarboDur® BC

Product Data Sheet (PDS) PDF - 475 KB (en)

Sikadur® Hex-300

Product Data Sheet (PDS) PDF - 494 KB (en)

Sika® Anchor-300

Product Data Sheet (PDS) PDF - 636 KB (en)

Sika® FerroGard®-300 DuoCrete

Product Data Sheet (PDS) PDF - 347 KB (en)

SikaGrout®-300 PT AU

Product Data Sheet (PDS) PDF - 353 KB (en)

Refurbishment for owners of buildings and civil engineering structures

Brochure PDF - 1 MB (en)

Sikadur® UA

Product Data Sheet (PDS) PDF - 175 KB (en)

Sikadur®-31+

Product Data Sheet (PDS) PDF - 1 MB (en)

Sikadur®-32+

Product Data Sheet (PDS) PDF - 1 MB (en)

Sikadur®-61

Product Data Sheet (PDS) PDF - 1 MB (en)

Sikadur®-30

Product Data Sheet (PDS) PDF - 468 KB (en)

Sikadur®-42 (au)

Product Data Sheet (PDS) PDF - 408 KB (en)

Sikadur®-52 Normal

Product Data Sheet (PDS) PDF - 213 KB (en)

Sikadur Hex-300 Part A

https://nzl.sika.com/dms/getdocument.get/b276f252-9f23-36f0-b77c-a1222c5fec35/Sikadur%20Hex-300%20Part%20A%20-SDS-0519.pdf

SAFETY DATA SHEET Sikadur-300 Part A Version 3.0 Revision Date: 2022/09/15 SDS Number: 000000207639 Date of last issue: 2022/01/23 Date of first issue: 2018/09/11 1 / 10 Section 1: Identification

Sikadur Hex-300 Part B

https://nzl.sika.com/dms/getdocument.get/aec24110-89ab-3667-83d3-f31d1dd66d97/Sikadur%20Hex-300%20Part%20B%20-SDS-0519.pdf

SAFETY DATA SHEET Sikadur-300 Part B Version 5.0 Revision Date: 2022/09/15 SDS Number: 000000207642 Date of last issue: 2021/01/20 Date of first issue: 2017/09/01 1 / 10 Section 1: Identification

SikaWrap® FX-50 C | Structural Strengthening Concrete

https://nzl.sika.com/en/construction/concrete-refurbishment/strengthening/sikawrap-fx-50-c.html

SikaWrap® FX-50 C is a unidirectional carbon fibre string, encased in a plastic envelope, which is used as near surface mounted strengthening and as fibre connector for the anchorage of SikaWrap® fabrics.

SikaWrap®-600 C

https://nzl.sika.com/dms/getdocument.get/8588a404-24c2-4674-b850-449034cf0b80/sikawrap_-600_c.pdf

The system build-up and configuration as described must be fully complied with and may not be changed. Concrete substrate adhesive primer Sikadur®-330 or Sikadur®-300 Impregnating / laminating resin

SikaWrap®-600 C WV

https://nzl.sika.com/dms/getdocument.get/dd90d410-b7e9-4eca-b582-50ebba46d64d/sikawrap_-600_c_wv.pdf

®-330 or Sikadur®-300 Impregnating / laminating resin Sikadur®-300 Structural strengthening fabric SikaWrap®-600 C WV For detailed information on Sikadur®-330 or Sikadur®-300, together with the resin and fabric

SikaWrap® Hex-100 G | Structural Strengthening Concrete

https://nzl.sika.com/en/construction/concrete-refurbishment/strengthening/sikawrap-hex-100g.html

SikaWrap® Hex-100 G is a unidirectional E-glass fiber fabric. Material is field laminated using Sikadur Hex 300 epoxy to form a glass fiber reinforced polymer (GFRP) used to strengthen structural

SikaWrap® FX-50 C

https://nzl.sika.com/dms/getdocument.get/89149658-cfa5-45bc-8a8d-4ee763943019/sikawrap_fx-50_c.pdf

000 N/mm2 (related to fibre cross section)* (EN 2561**) *Impregnating resin: Sikadur®-300, Sikadur®-52 N or Sikadur®-52 LP *Values in longitudinal direction of the fibres ** Standard adapted to fit

Grand Egyptian Museum

https://nzl.sika.com/en/projects/international-references/grand-egyptian-museum-giza1.html

Strengthening complete system covering all the technical requirements including heating curing system and saturating machines. Sikadur®-300 Impregnating/laminating resin tests submitted for the glass transition

SikaWrap® Hex-100 G

https://nzl.sika.com/dms/getdocument.get/43817a92-6e2d-44b2-89ad-e47c39c20575/sikawrap_hex-100g.pdf

Sikadur Hex 300 epoxy to form a glass fiber reinforced polymer (GFRP) used to strengthen structural elements. USES SikaWrap® Hex-100 G may only be used by experi- enced professionals. SikaWrap® Hex-100 G

SikaWrap®-930 G

https://nzl.sika.com/dms/getdocument.get/225c5039-57ab-4516-a77c-0a8f97781d8c/sikawrap_-930_g.pdf

with and may not be changed. Concrete substrate adhesive primer Sikadur® Hex-300 or Sikadur®-300 Impregnating or laminating resin Sikadur® Hex-300 or Sikadur®-300 Structural strengthening fabric SikaWrap®-930 G

Structural Strengthening Concrete

https://nzl.sika.com/en/construction/concrete-refurbishment/strengthening.html

Explore our Structural Strengthening Concrete Solutions Sikadur® Hex-300 High-modulus, high-strength, impregnating resin Sikadur®-300 2-component epoxy impregnation resin Sikadur®-30 Thixotropic

Sika® CarboDur® BC

https://nzl.sika.com/dms/getdocument.get/fcbe70d2-369b-4610-adb4-26939142f6b6/sika_carbodur_bc.pdf

application. Sikadur®-300 epoxy resin based adhesive is used for horizontal ap- plications. Sika® CarboDur® BC rods can also be used for anchor- ing SikaWrap® fabrics where positive attachment to concrete

Sikadur® Hex-300 | Structural Strengthening Concrete

https://nzl.sika.com/en/construction/concrete-refurbishment/strengthening/sikadur-hex-300.html

Sikadur® Hex-300 is a two-component 100% solids, moisture-tolerant, high strength, high modulus epoxy. Sikadur® Hex 300 is compliant with the 2012 and 2009 International Building Codes (IBC)

Sikadur® Hex-300

https://nzl.sika.com/dms/getdocument.get/2f711d8a-8df5-4cb4-95b0-c2d7cc079d81/sikadur_hex-300.pdf

PRODUCT DATA SHEET Sikadur® Hex-300 HIGH-MODULUS, HIGH-STRENGTH, IMPREGNATING RESIN DESCRIPTION Sikadur® Hex-300 is a two-component 100% solids, moisture-tolerant, high strength, high modulus epoxy.

Sika® FerroGard®-300 DuoCrete | Concrete Corrosion Protection

https://nzl.sika.com/en/construction/concrete-refurbishment/corrosion-protection/sika-ferrogard-300duocrete.html

Sika® FerroGard®-300 DuoCrete mortar is used in the installation of the Sika^® FerroGard^® Duo Hybrid Anode range into corrosion damaged reinforced concrete. The Sika®

Sika® Anchor-300

https://nzl.sika.com/dms/getdocument.get/f7f56481-3cad-4b14-b6bd-2b1687bdde8a/sika_anchor-300.pdf

Sikaplan® WP 1120 -types▪ Sikaplan® WP 2101 -types▪ Sikaplan® WP 2110 -types▪ Sikaplan® WP Protection Sheet-Types▪ Sikadur® -31▪ Product Data Sheet Sika® Anchor-300 August 2018, Version 01.01

Sikadur®-31+ | Structural Applications - Horizontal & Overhead Holes

https://nzl.sika.com/en/diy-trade/adhesives-glues/anchoring-bars-bolts/structural-applications-horizontaloverheadholes/sikadur-31-plus.html

Sikadur®-31+; is a 2-part, low VOC epoxy based, moisture tolerant, thixotropic, structural adhesive which bonds most construction materials. It has high mechanical strengths and can also be used

Sika® FerroGard®-300 DuoCrete

https://nzl.sika.com/dms/getdocument.get/f37e8657-642f-489f-9083-51cc5da997f3/sika_ferrogard_-300duocrete.pdf

PRODUCT DATA SHEET Sika® FerroGard®-300 DuoCrete ACTIVATING MORTAR FOR HYBRID GALVANIC SYSTEM DESCRIPTION Sika® FerroGard®-300 DuoCrete mortar is used in the installation of the Sika® FerroGard® Duo

Sikadur®

https://nzl.sika.com/en/about-us/sustainable-solutions/sustainability-performance-management/sikadur.html

Welcome to the next generation of low-VOC epoxy adhesives. Our Sikadur® resins are typically used for bonding, repairing, sealing, filling, re-profiling or strengthening most available construction

SikaGrout®-300 PT AU

https://nzl.sika.com/dms/getdocument.get/31f0a8eb-b0a0-467a-baa0-545af07bd6c5/sikagrout_-300_ptau.pdf

Product Data Sheet SikaGrout®-300 PT AU April 2020, Version 01.01 020201010010000342 PRODUCT DATA SHEET SikaGrout®-300 PT AU HIGH PERFORMANCE, ZERO BLEED, SAND FREE, CEMENTITIOUS GROUT